Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81210B
1.INSTALL FOG LIGHT BULB
Open the front fender liner LH as shown in the illustration.
Insert the fog light bulb into place.
Do not touch the glass part of the fog light bulb.
Turn the fog light bulb clockwise until the bulb stops to install it.
| *A | except Off Road Package | *B | for Off Road Package |
|
Turn in this Direction | - | - |
Connect the connector.
| *A | except Off Road Package | *B | for Off Road Package |
Return the front fender liner LH to its original position.
|
Screw |
|
Clip |
Install the 2 clips.
Install the screw.
53896B
2.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH
Use the same procedure described for the RH side.
for Short Type:
Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>INSTALLATION
for Long Type:
Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>INSTALLATION