85397
1.INSTALL LEVEL WARNING SWITCH ASSEMBLY (w/ Level Warning Switch)
85330
2.INSTALL WINDSHIELD WASHER JAR ASSEMBLY
Attach the guide and temporarily place the windshield washer jar assembly.
Install the windshield washer jar assembly with the 3 bolts in the order shown in the illustration.
| *A | w/ Level Warning Switch |
w/ Level Warning Switch:
Connect the connector.
Attach the clamp.
Attach the clamp and connect the washer hose.
85301
3.INSTALL WASHER INLET SUB-ASSEMBLY
| *a | Matchmarks |
|
Place Hand Here |
|
Install in this Direction |
Hold the position shown in the illustration and insert the washer inlet sub-assembly into the windshield washer jar in the direction indicated by the arrow.
Align the matchmarks on the washer inlet with the matchmarks on the windshield washer jar assembly and install it.
Install the washer inlet sub-assembly with the clip.
85280A
4.INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)
52119A
5.INSTALL FRONT BUMPER COVER
for Off Road Package:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Off Road Package)>INSTALLATION
except Off Road Package:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (except Off Road Package)>INSTALLATION
85310
6.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
|
Install in this Direction |
|
Washer hose |
|
Connector |
Install the windshield washer motor and pump assembly as shown in the illustration.
Connect the connector.
Connect the washer hose to the windshield washer motor and pump assembly.
Insert washer hose to joint all the way.
7.ADD WASHER FLUID
Connect the washer hose to the windshield washer motor and pump assembly.
Insert washer hose to joint all the way.
Add the windshield washer fluid to the windshield washer jar assembly.
53875A
8.INSTALL FRONT FENDER LINER RH
Attach the claw to install the front fender liner RH and 4 grommets.
w/ Mudguard:
Install the 8 clips and 2 screws.
| *A | w/o Mudguard | - | - |
|
Clip |
|
Screw |
w/o Mudguard:
Install the 9 clips and 2 screws.
75601A
9.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH (except Off Road Package)
Use the same procedure described for the LH side.
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>WHEEL OPENING MOULDING (for Front)>INSTALLATION
75601A
10.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH (for Off Road Package)
Use the same procedure described for the LH side.
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>WHEEL OPENING MOULDING (for Front)>INSTALLATION
51441
11.INSTALL NO. 1 ENGINE UNDER COVER
76621D
12.INSTALL FRONT FENDER MUDGUARD RH (w/ Mudguard)
Use the same procedure described for the LH side.
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>MUDGUARD>INSTALLATION
53895B
13.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (for Long Type)
Attach the claw and install the front fender front splash shield RH.
Install the 4 screws.
53895B
14.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (for Short Type)
Attach the claw and install the front fender front splash shield RH.
Install the 3 screws.
15.INSTALL FRONT WHEEL
86790
16.ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
for Gasoline Model:
17.PERFORM CALIBRATION (w/ Parking Support Brake System)
for Gasoline Model: