Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.INSTALL HEADLIGHT ASSEMBLY LH
| *a | Lower Bracket |
| *b | Connector Lock Lever |
|
Place Hands Here |
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Connect the connector and lock the connector lock lever under the headlight assembly LH.
Set the headlight assembly LH in the direction indicated by the arrow (1) to the vehicle.
Slide the headlight assembly LH in the direction indicated by the arrow (2) and attach the guide and lower bracket.
Place your hand on 2 brackets of the headlight assembly LH to set them on the screw seats.
Be careful not to break the bracket.
|
Screw |
|
Bolt |
Install the bolt and 3 screws.
2.INSTALL FRONT BUMPER ASSEMBLY
3.PERFORM SYSTEM INITIALIZATION AND CALIBRATION
4.ADJUST HEADLIGHT AIMING