Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81220
1.INSTALL FOG LIGHT ASSEMBLY LH
Open the front fender liner LH as shown in the illustration.
Attach the guide to set the fog light assembly LH.
Install the 2 screws.
| *A | except Off Road Package | *B | for Off Road Package |
Connect the connector.
| *A | except Off Road Package | *B | for Off Road Package |
Return the front fender liner LH to its original position.
|
Screw |
|
Clip |
Install the 2 clips.
Install the screw.
53896B
2.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH
Use the same procedure described for the RH side.
for Short Type:
Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>INSTALLATION
for Long Type:
Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>INSTALLATION
3.ADJUST FOG LIGHT AIMING