Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
76801
1.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
2.REMOVE REAR LIGHT ASSEMBLY LH
If the rear light assembly LH has been removed, replace the rear light packing LH and rear light gasket LH with a new one.
|
Protective Tape |
Apply protective tape as shown in the illustration.
Disconnect the connector.
Remove the 3 nuts.
|
Remove in this Direction |
Pull the rear light assembly LH toward the rear of the vehicle to detach the claw and clip and pin to remove it.