67939B
1.REMOVE BACK DOOR CENTER GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure as for the LH side.
69196
4.REMOVE BACK DOOR GRIP BASE
69195A
5.REMOVE BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67750
6.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
76801
7.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Remove the 4 bolts.
|
Protective Tape |
Apply protective tape around the back door outside garnish sub-assembly.
Using moulding remover A, detach the clip A and claw A.
| *a | Clip A | *b | Claw A |
|
Place Hands Here |
|
Remove in this Direction |
Placing your hand in the gap, pull the back door outside garnish sub-assembly to detach clip and claw starting from the left in the order shown in the illustration.