Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.INSTALL REAR LIGHT ASSEMBLY LH
|
Back Window Lower Moulding |
|
Tape |
When installing the rear light assembly LH, secure the back window lower moulding to the surface of the back door glass with tape so that the back window lower moulding does not jam.
|
Install in this Direction |
Attach the pin and clip and claw to install the rear light assembly LH.
Install the 3 nuts.
Connect the connector.
Return the back door window outside moulding to its original position.
76801
2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY