Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH (for Upper Side)
RM3620E _59 Vehicle Exterior _076404 EXTERIOR PANELS / TRIM _0377757 BACK DOOR OUTSIDE GARNISH(for Upper Side) A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH(for Upper Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.
B524047C01
0,0 0,0 false
V100144

Back Window Lower Moulding
V100145

Tape


When installing the back door outside garnish sub-assembly, secure the back window lower moulding to the surface of the back door glass with tape so that the back window lower moulding does not jam.


b.
B524048C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip and claw to install the back door outside garnish sub-assembly.


c.

Remove the protective tape.


d.

Return the back window lower moulding to its original position.


e.
B524038

Install the 4 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 67750 2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

Hide 69196 3.INSTALL BACK DOOR GRIP BASE

Hide 69195A 4.INSTALL BACK DOOR GRIP

HINT:

Use the same procedure described for the back door grip base.


Hide 67938A 5.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 6.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 67939B 7.INSTALL BACK DOOR CENTER GARNISH