Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH
RM3620E _59 Vehicle Exterior _077130 LIGHTING (EXT) _0375602 STOP LIGHT SWITCH A

LIGHTING (EXT)  STOP LIGHT SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 84345 1.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

a.
E404122

Attach the claw to install a new stop light switch mounting adjuster.


Hide 84340 2.INSTALL STOP LIGHT SWITCH ASSEMBLY

a.
E167768

Insert the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal.

NOTICE:

Do not depress the brake pedal.



b.
E404123C01
3.25,1.625 3.427,1.813 0.177,0.188 10 true *a
*a Protrusion Amount Measurement Area
V113147

Turn in this Direction


Turn the stop light switch assembly clockwise by approximately one fourth of a rotation.


c.

Check the protrusion amount of the shaft.

Standard:

0.5 to 2.6 mm (0.0197 to 0.1024 in.)



d.
E404124

Connect the connector.


Hide 55606 3.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY