Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
87103B
1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Install the blower motor with fan sub-assembly with the 3 screws.
Replace the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.
| *A | for LHD | *B | for RHD |
| *C | for Two Layer Blower Type | *D | for Single Layer Blower Type |
|
Screw |
|
Connector |
Connect the connector.
55607
2.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY