Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
88790B
1.INSTALL THERMISTOR ASSEMBLY
Connect the connector.
| *A | w/o Grille Shutter | *B | w/ Grille Shutter |
Attach the clamp to install the thermistor assembly.
2.INSTALL FRONT BUMPER ASSEMBLY (w/o Grille Shutter)
for Off Road Package:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Off Road Package)>INSTALLATION
except Off Road Package:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (except Off Road Package)>INSTALLATION
53019F
3.INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (w/ Grille Shutter)