A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
76088B
1.INSTALL REAR SIDE SPOILER SUB-ASSEMBLY LH
|
Install in this Direction |
Attach the clip and install the rear side spoiler sub-assembly LH as shown in the illustration.
76087B
2.INSTALL REAR SIDE SPOILER SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
76085
3.INSTALL REAR SPOILER SUB-ASSEMBLY
|
Install in this Direction |
Attach the clip to install the rear spoiler sub-assembly as shown in the illustration.
Install the bolt.
Use the same procedure for the RH and LH side.
Install the 6 nuts.
| *1 | Grommet |
Attach the Grommet.
Connect the connector.
Install the 4 hole plugs.
Remove the protective tape.
67938A
4.INSTALL BACK DOOR SIDE GARNISH LH
67937B
5.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
67939B
6.INSTALL BACK DOOR CENTER GARNISH