69478A
1.INSTALL BACK DOOR LOWER STOPPER CUSHION
Attach the claw and install a new back door lower stopper cushion.
Use the same procedure for the RH and LH sides.
67837N
2.INSTALL BACK DOOR DUST PROOF SEAL
Attach the claw and guide to install the back door dust proof seal.
Use the same procedure for the RH and LH sides.
67837N
3.INSTALL BACK DOOR DUST PROOF SEAL
Attach the claw and install the back door dust proof seal.
68984
4.INSTALL BACK DOOR STAY STOPPER (w/ Power Back Door)
68948
5.INSTALL BACK DOOR LOWER DAMPER STAY BRACKET LH (w/ Power Back Door)
68947
6.INSTALL BACK DOOR LOWER DAMPER STAY BRACKET RH (w/ Power Back Door)
Use the same procedure described for the LH side.
68946
7.INSTALL BACK DOOR UPPER DAMPER STAY BRACKET LH (w/ Power Back Door)
68945
8.INSTALL BACK DOOR UPPER DAMPER STAY BRACKET RH (w/ Power Back Door)
Use the same procedure described for the LH side.
9.INSTALL POWER BACK DOOR UNIT ASSEMBLY LH (w/ Power Back Door)
10.INSTALL POWER BACK DOOR UNIT ASSEMBLY RH (w/ Power Back Door)
Use the same procedure described for the LH side.
68984
11.INSTALL BACK DOOR STAY STOPPER (w/o Power Back Door)
68948
12.INSTALL BACK DOOR LOWER DAMPER STAY BRACKET LH (w/o Power Back Door)
68947
13.INSTALL BACK DOOR LOWER DAMPER STAY BRACKET RH (w/o Power Back Door)
Use the same procedure described for the LH side.
68946
14.INSTALL BACK DOOR UPPER DAMPER STAY BRACKET LH (w/o Power Back Door)
68945
15.INSTALL BACK DOOR UPPER DAMPER STAY BRACKET RH (w/o Power Back Door)
Use the same procedure described for the LH side.
68960
16.INSTALL BACK DOOR STAY ASSEMBLY LH (w/o Power Back Door)
68950C
17.INSTALL BACK DOOR STAY ASSEMBLY RH (w/o Power Back Door)
Use the same procedure described for the LH side.
76802E
18.INSTALL BACK DOOR LOWER OUTSIDE GARNISH SUB-ASSEMBLY
19.INSTALL REAR LIGHT ASSEMBLY LH
20.INSTALL REAR LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
86790
21.INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
76825
22.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (w/o Rear View Monitor System)
|
Install in this Direction |
Attach the claw to install the 2 screw grommets.
|
Install in this Direction |
Attach the claw and install the back door outside garnish protector.
Install the 2 screws.
84840G
23.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
81690A
24.INSTALL LICENSE PLATE LIGHT ASSEMBLY LH
81270D
25.INSTALL LICENSE PLATE LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
76801
26.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
67372A
27.INSTALL BACK DOOR WEIGHT
Attach the guide.
Install the back door weight with the 3 bolts.
89222A
28.INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)
69350P
29.INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/o Power Back Door)
69350P
30.INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/ Power Back Door)
85143R
31.INSTALL REAR WIPER MOTOR GROMMET
85110R
32.INSTALL REAR WIPER MOTOR ASSEMBLY
33.INSTALL REAR WIPER ARM AND BLADE ASSEMBLY
85292A
34.INSTALL REAR WIPER ARM HEAD CAP
85345R
35.INSTALL REAR WASHER NOZZLE
Attach the claw and install the rear washer nozzle.
Connect the rear washer hose to the rear washer nozzle.
867C0
36.INSTALL INNER MIRROR CAMERA ASSEMBLY (w/ Digital inner mirror)
76085
37.INSTALL REAR SPOILER SUB-ASSEMBLY
84280D
38.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
84270G
39.INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
Use the same procedure described for the LH side.
84966A
40.INSTALL NO. 1 POWER BACK DOOR CONTROL SWITCH (w/ Power Back Door)
67766
41.INSTALL BACK DOOR NO. 2 SERVICE HOLE COVER
Attach the guide and claw to install the back door No. 2 service hole cover.
67848
42.INSTALL BACK DOOR SERVICE HOLE COVER LH
Attach the guide and claw to install the back door service hole cover LH.
67847
43.INSTALL BACK DOOR SERVICE HOLE COVER RH
Use the same procedure described for the LH side.
74654A
44.INSTALL BACK DOOR ASSIST GRIP LH
Attach the guide and claw to install the back door assist grip LH.
74653
45.INSTALL BACK DOOR ASSIST GRIP RH
Use the same procedure described for the LH side.
67750
46.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
Attach the clip and install the back door trim board assembly.
Install the 4 bolts.
69196
47.INSTALL BACK DOOR GRIP BASE
|
Install in this Direction |
Attach the claw and clip to install the back door grip base as shown in the illustration.
69195A
48.INSTALL BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67938A
49.INSTALL BACK DOOR SIDE GARNISH LH
|
Install in this Direction |
Attach the clip and install the back door side garnish LH as shown in the illustration.
|
Install in this Direction |
Attach the claw and guide as shown in the illustration.
|
Install in this Direction |
Attach the claw and guide as shown in the illustration.
67937B
50.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
67939B
51.INSTALL BACK DOOR CENTER GARNISH
| *A | w/o Digital Inner Mirror |
| *B | w/ Digital Inner Mirror |
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Attach the claw and clip to install the back door center garnish as shown in the illustration.
52. INITIALIZE POWER BACK DOOR SYSTEM (w/ Power Back Door)
for HV Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for HV Model)>INITIALIZATION
for Gasoline Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for Gasoline Model)>INITIALIZATION
53.INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)
for HV Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for HV Model)>OPERATION CHECK
for Gasoline Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for Gasoline Model)>OPERATION CHECK
86790
54.ADJUST TELEVISION CAMERA ASSEMBLY
w/ Parking Assist Monitor System:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>CALIBRATION
w/ Panoramic View Monitor System:
for Gasoline Model: