Use the same procedure for the RH and LH sides.
The procedures listed below are for the LH side.
67874C
1.REMOVE REAR DOOR NO. 5 WEATHERSTRIP LH
75078
2.REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH
Remove the clip.
|
Protective Tape |
Apply protective tape around the rear door lower outside moulding sub-assembly LH.
Remove the hole plug.
Remove the nut.
|
Place Hand Here |
|
Remove in this Direction |
Detach the clip and remove the rear door lower outside moulding sub-assembly LH as shown in the illustration.
75062
3.REMOVE OUTSIDE MOULDING SET LH (except Off Road Package)
|
Screw |
|
Clip |
Remove the screw and clip.
|
Protective Tape |
Apply protective tape around the outside moulding set LH.
|
Place Hand Here |
|
Remove in this Direction |
Detach the clip and claw and remove the outside moulding set LH as shown in the illustration.
75062
4.REMOVE OUTSIDE MOULDING SET LH (for Off Road Package)
When removing the outside moulding set LH, if the double-sided tape is difficult to remove, heat the rear door panel and outside moulding set LH using a heat light.
| Item | Temperature |
|---|---|
| Rear Door Panel | 20 to 30°C (68 to 86°F) |
| Outside Moulding Set LH |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear door panel and outside moulding set LH excessively.
|
Protective Tape |
Apply protective tape around the outside moulding set LH.
|
Screw |
|
Clip |
Remove the screw and clip.
| *a | Double-sided Tape |
|
Place Hand Here |
|
Remove in this Direction |
Detach the clip and claw, double-sided tape to remove the outside moulding set LH as shown in the illustration.
67888J
5.REMOVE NO. 2 ACCESS PANEL WEATHERSTRIP LH
Detach the clip and remove the No. 2 access panel weatherstrip LH.
67858B
6.REMOVE REAR DOOR PANEL PROTECTOR LH
|
Screw |
|
Clip |
Remove the screw and clip.
|
Protective Tape |
Apply protective tape around the rear door panel protector LH.
|
Remove in this Direction |
Detach the claw and guide to remove the rear door panel protector LH as shown in the illustration.