Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM3620E _59 Vehicle Exterior _076404 EXTERIOR PANELS / TRIM _0377221 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE ROOF RACK ASSEMBLY LH (w/ Roof Rack)

Hide 75554A 2.REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH (w/ Roof Rack)

a.
B525853C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the rear roof drip side finish moulding LH.


b.
B525854

Using moulding remover D, detach the clip and remove the rear roof drip side finish moulding LH.

NOTICE:
·

Do not remove the roof drip side finish moulding clip.

·

If a roof drip side finish moulding clip is damaged or falls off, replace it with a new one.




Hide 75552E 3.REMOVE ROOF DRIP SIDE FINISH MOULDING LH (w/o Roof Rack)

a.
B525859C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the roof drip side finish moulding LH.


b.
B525855C02
0.479,2.01 0.583,1.583 0.583,1.583 0.917,1.583 true 0.833,1.5 0.99,1.698 0.156,0.198 10 true *a
*a Double-sided Tape


Using moulding remover D, detach the clip and double-sided tape and remove the roof drip side finish moulding LH.

NOTICE:
·

Do not remove the roof drip side finish moulding clips.

·

If a roof drip side finish moulding clip is damaged or falls off, replace it with a new one.