84966A
1.INSTALL NO. 1 POWER BACK DOOR CONTROL SWITCH
|
Install in this Direction |
Attach the claw and install the No. 1 power back door control switch as shown in the illustration.
Attach the clamp and connect the connector.
67750
2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
69196
3.INSTALL BACK DOOR GRIP BASE
69195A
4.INSTALL BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67938A
5.INSTALL BACK DOOR SIDE GARNISH LH
67937B
6.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
67939B
7.INSTALL BACK DOOR CENTER GARNISH