67939B
1.REMOVE BACK DOOR CENTER GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
69196
4.REMOVE BACK DOOR GRIP BASE
69195A
5.REMOVE BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67750
6.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
84280D
7.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH
|
Screw |
|
Connector |
Disconnect the connector.
Remove the 4 screws.
|
Protective Tape |
Using a clip remover with its tip wrapped with protective tape, remove the 2 clips and power back door sensor assembly LH.
Detach the claw and remove the 4 grommets.
84270G
8.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH
Use the same procedure described for the LH side.