The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back door disassembly/reassembly are shown below.
67939B
1.REMOVE BACK DOOR CENTER GARNISH
| *A | w/o Digital Inner Mirror |
| *B | w/ Digital Inner Mirror |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Detach the claw and clip to remove the back door center garnish as shown in the illustration.
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
|
Place Hand Here |
|
Remove in this Direction |
Place your hand at the position shown in the illustration, to detach the claw and guide.
|
Place Hand Here |
|
Remove in this Direction |
Place your hand at the position shown in the illustration, to detach the claw and guide.
|
Remove in this Direction |
Detach the clip and remove the back door side garnish LH as shown in the illustration.
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
69196
4.REMOVE BACK DOOR GRIP BASE
|
Remove in this Direction |
Using a moulding remover A, detach the claw and clip to remove the back door grip base as shown in the illustration.
69195A
5.REMOVE BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67750
6.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
Remove the 4 bolts.
Detach the clip and remove the back door trim board assembly.
74654A
7.REMOVE BACK DOOR ASSIST GRIP LH
Detach the claw and guide to remove the back door assist grip LH.
74653
8.REMOVE BACK DOOR ASSIST GRIP RH
Use the same procedure described for the LH side.
67848
9.REMOVE BACK DOOR SERVICE HOLE COVER LH
Detach the claw and guide to remove the back door service hole cover LH.
67847
10.REMOVE BACK DOOR SERVICE HOLE COVER RH
Use the same procedure described for the LH side.
67766
11.REMOVE BACK DOOR NO. 2 SERVICE HOLE COVER
Detach the claw and guide to remove the back door No. 2 service hole cover.
84966A
12.REMOVE NO. 1 POWER BACK DOOR CONTROL SWITCH (w/ Power Back Door)
84280D
13.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
84270G
14.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
Use the same procedure described for the LH side.
76085
15.REMOVE REAR SPOILER SUB-ASSEMBLY
867C0
16.REMOVE INNER MIRROR CAMERA ASSEMBLY (w/ Digital inner mirror)
85345R
17.REMOVE REAR WASHER NOZZLE
Disconnect the rear washer hose from the rear washer nozzle.
Detach the claw and remove the rear washer nozzle.
85292A
18.REMOVE REAR WIPER ARM HEAD CAP
19.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
85110R
20.REMOVE REAR WIPER MOTOR ASSEMBLY
85143R
21.REMOVE REAR WIPER MOTOR GROMMET
69350P
22.REMOVE BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/ Power Back Door)
69350P
23.REMOVE BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/o Power Back Door)
89222A
24.REMOVE MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)
67372A
25.REMOVE BACK DOOR WEIGHT
Remove the 3 bolts.
Detach the guide and remove the back door weight.
76801
26.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
81690A
27.REMOVE LICENSE PLATE LIGHT ASSEMBLY LH
81270D
28.REMOVE LICENSE PLATE LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
84840G
29.REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
86790
30.REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
76825
31.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (w/o Rear View Monitor System)
Remove the 2 screws.
|
Remove in this Direction |
Detach the claw and remove the 2 screw grommets.
Remove the back door outside garnish protector.
32.REMOVE REAR LIGHT ASSEMBLY LH
33.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
76802E
34.REMOVE BACK DOOR LOWER OUTSIDE GARNISH SUB-ASSEMBLY
68960
35.REMOVE BACK DOOR STAY ASSEMBLY LH (w/o Power Back Door)
68950C
36.REMOVE BACK DOOR STAY ASSEMBLY RH (w/o Power Back Door)
Use the same procedure described for the LH side.
68946
37.REMOVE BACK DOOR UPPER DAMPER STAY BRACKET LH (w/o Power Back Door)
68945
38.REMOVE BACK DOOR UPPER DAMPER STAY BRACKET RH (w/o Power Back Door)
Use the same procedure described for the LH side.
68948
39.REMOVE BACK DOOR LOWER DAMPER STAY BRACKET LH (w/o Power Back Door)
68947
40.REMOVE BACK DOOR LOWER DAMPER STAY BRACKET RH (w/o Power Back Door)
Use the same procedure described for the LH side.
68984
41.REMOVE BACK DOOR STAY STOPPER (w/o Power Back Door)
42.REMOVE POWER BACK DOOR UNIT ASSEMBLY LH (w/ Power Back Door)
43.REMOVE POWER BACK DOOR UNIT ASSEMBLY RH (w/ Power Back Door)
Use the same procedure described for the LH side.
68946
44.REMOVE BACK DOOR UPPER DAMPER STAY BRACKET LH (w/ Power Back Door)
68945
45.REMOVE BACK DOOR UPPER DAMPER STAY BRACKET RH (w/ Power Back Door)
Use the same procedure described for the LH side.
68948
46.REMOVE BACK DOOR LOWER DAMPER STAY BRACKET LH (w/ Power Back Door)
68947
47.REMOVE BACK DOOR LOWER DAMPER STAY BRACKET RH (w/ Power Back Door)
Use the same procedure described for the LH side.
68984
48.REMOVE BACK DOOR STAY STOPPER (w/ Power Back Door)
67837N
49.REMOVE BACK DOOR DUST PROOF SEAL
Detach the claw and remove the back door dust proof seal.
67837N
50.REMOVE BACK DOOR DUST PROOF SEAL
Detach the claw and guide to remove the back door dust proof seal.
Use the same procedure for the RH and LH sides.
69478A
51.REMOVE BACK DOOR LOWER STOPPER CUSHION
Detach the claw and remove the back door lower stopper cushion.
Use the same procedure for the RH and LH sides.