84280D
1.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH
Attach the claw and install the 4 grommets.
Install the power back door sensor assembly LH with the 2 clips.
|
Screw |
|
Connector |
Install the 4 screws in the order shown in the illustration.
Connect the connector.
84270G
2.INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH
Use the same procedure described for the LH side.
67750
3.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
69196
4.INSTALL BACK DOOR GRIP BASE
69195A
5.INSTALL BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67938A
6.INSTALL BACK DOOR SIDE GARNISH LH
67937B
7.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
67939B
8.INSTALL BACK DOOR CENTER GARNISH