33311A
1.INSTALL FRONT INPUT SHAFT BEARING
Using SST and a press, install a new front input shaft bearing to the input shaft.
33333A
2.INSTALL 3RD GEAR NEEDLE ROLLER BEARING
Coat the 3rd gear needle roller bearing with gear oil and install it to the input shaft.
33333
3.INSTALL 3RD GEAR
Coat the 3rd gear with gear oil and install it to the input shaft.
33369
4.INSTALL NO. 3 SYNCHRONIZER RING
Coat the No. 3 synchronizer ring with gear oil and install it to the 3rd gear.
33362
5.INSTALL NO. 2 TRANSMISSION CLUTCH HUB
Coat the No. 2 transmission clutch hub with gear oil.
| *a | Without Groove: 4th gear side |
| *b | With Groove: 3rd gear side |
| *c | Groove |
Position the No. 2 transmission clutch hub on the input shaft.
Using SST and a press, install the No. 2 transmission clutch hub to the input shaft.
When installing the No. 2 transmission clutch hub, align the protrusions of the No. 3 synchronizer ring with the cutouts of the No. 2 transmission clutch hub.
33366
6.INSTALL NO. 2 SYNCHROMESH SHIFTING KEY
Install the 3 No. 2 synchromesh shifting keys to the No. 2 transmission clutch hub.
33364
7.INSTALL NO. 2 TRANSMISSION HUB SLEEVE
Coat the No. 2 transmission hub sleeve with gear oil.
| *1 | No. 2 Transmission Hub Sleeve |
| *2 | No. 2 Transmission Clutch Hub |
Install the No. 2 transmission hub sleeve to the No. 2 transmission clutch hub as shown in the illustration.
33362A
8.INSTALL NO. 2 CLUTCH HUB SETTING SHAFT SNAP RING
Select a new No. 2 clutch hub setting shaft snap ring that will allow minimal axial play.
0.1 mm (0.00394 in.) or less
| Part No. | Thickness mm (in.) | Mark |
|---|---|---|
| 90520-38023 | 2.30 (0.0906) | A |
| 90520-38024 | 2.36 (0.0929) | B |
| 90520-38025 | 2.42 (0.0953) | C |
| 90520-38026 | 2.48 (0.0976) | D |
| 90520-38027 | 2.54 (0.1000) | E |
| 90520-38028 | 2.60 (0.1024) | F |
Using a No. 1 snap ring expander, install the No. 2 clutch hub setting shaft snap ring.
Do not expand the No. 2 clutch hub setting shaft snap ring more than necessary as it may deform and loose its tension.
Do not damage the journal surface of the input shaft.
33369B
9.INSTALL NO. 4 SYNCHRONIZER RING
Coat the No. 4 synchronizer ring with gear oil and install it to the No. 2 transmission clutch hub.
When installing the No. 4 synchronizer ring, align the protrusions of the No. 4 synchronizer ring with the cutouts of the No. 2 transmission clutch hub.
33334
10.INSTALL 4TH GEAR
Coat the 4th gear with gear oil and install it to the input shaft.
33311L
11.INSTALL INNER INPUT SHAFT SPACER
Install the inner input shaft spacer.
33311M
12.INSTALL OUTER INPUT SHAFT SPACER
Install the outer input shaft spacer.
33336
13.INSTALL 5TH GEAR
Coat the 5th gear with gear oil and install it to the input shaft.
33396C
14.INSTALL NO. 5 SYNCHRONIZER RING(MTM) (for 5th Gear)
Coat the No. 5 synchronizer ring(MTM) (for 5th gear) with gear oil and install it to the 5th gear.
33393
15.INSTALL NO. 3 TRANSMISSION CLUTCH HUB
Coat the No. 3 transmission clutch hub with gear oil.
| *a | Without Groove: 6th gear sub-assembly side |
| *b | With Groove: 5th gear side |
| *c | Groove |
Position the No. 3 transmission clutch hub on the input shaft.
Using SST and a press, install the No. 3 transmission clutch hub to the input shaft.
When installing the No. 3 transmission clutch hub, align the protrusions of the No. 5 synchronizer ring(MTM) (for 5th gear) with the cutouts of the No. 3 transmission clutch hub.
33394
16.INSTALL NO. 3 SYNCHROMESH SHIFTING KEY
Install the 3 No. 3 synchromesh shifting keys to the No. 3 transmission clutch hub.
33395
17.INSTALL NO. 3 TRANSMISSION HUB SLEEVE
Coat the No. 3 transmission hub sleeve with gear oil.
Install the No. 3 transmission hub sleeve to the No. 3 transmission clutch hub.
33393A
18.INSTALL NO. 3 TRANSMISSION CLUTCH HUB SHAFT SNAP RING
Select a new No. 3 transmission clutch hub shaft snap ring that will allow minimal axial play.
0.1 mm (0.00394 in.) or less
| Part No. | Thickness mm (in.) | Mark |
|---|---|---|
| 90520-34045 | 2.30 (0.0906) | 0 |
| 90520-34046 | 2.36 (0.0929) | 1 |
| 90520-34047 | 2.42 (0.0953) | 2 |
| 90520-34048 | 2.48 (0.0976) | 3 |
| 90520-34049 | 2.54 (0.1000) | 4 |
| 90520-34050 | 2.60 (0.1024) | 5 |
Using a No. 1 snap ring expander, install the No. 3 transmission clutch hub shaft snap ring.
Do not expand the No. 3 transmission clutch hub shaft snap ring more than necessary as it may deform and loose its tension.
Do not damage the journal surface of the input shaft.
33396C
19.INSTALL NO. 5 SYNCHRONIZER RING(MTM) (for 6th Gear Sub-assembly)
Coat the No. 5 synchronizer ring(MTM) (for 6th gear sub-assembly) with gear oil and install it to the No. 3 transmission clutch hub.
When installing the No. 5 synchronizer ring(MTM) (for 6th gear sub-assembly), align the protrusions of the No. 5 synchronizer ring(MTM) (for 6th gear sub-assembly) with the cutouts of the No. 3 transmission clutch hub.
33337
20.INSTALL 6TH GEAR SUB-ASSEMBLY
Coat the 6th gear sub-assembly with gear oil and install it to the input shaft.
33311E
21.INSTALL REAR INPUT SHAFT RADIAL BALL BEARING
Using SST and a press, install a new rear input shaft radial ball bearing to the input shaft.
33311Y
22.INSTALL REAR INPUT SHAFT BEARING SHAFT SNAP RING
Select a new rear input shaft bearing shaft snap ring that will allow minimal axial play.
0.1 mm (0.00394 in.) or less
| Part No. | Thickness mm (in.) | Mark |
|---|---|---|
| 90520-31064 | 1.95 (0.0768) | 0 |
| 90520-31065 | 2.01 (0.0791) | 1 |
| 90520-31066 | 2.07 (0.0815) | 2 |
| 90520-31067 | 2.13 (0.0839) | 3 |
| 90520-31068 | 2.19 (0.0862) | 4 |
| 90520-31069 | 2.25 (0.0886) | 5 |
Using a No. 1 snap ring expander, install the rear input shaft bearing shaft snap ring.
Do not expand the rear input shaft bearing shaft snap ring more than necessary as it may deform and loose its tension.
Do not damage the journal surface of the input shaft.
23.INSPECT 6TH GEAR SUB-ASSEMBLY THRUST CLEARANCE
24.INSPECT 5TH GEAR THRUST CLEARANCE
25.INSPECT 4TH GEAR THRUST CLEARANCE
26.INSPECT 3RD GEAR THRUST CLEARANCE
27.INSPECT 6TH GEAR SUB-ASSEMBLY RADIAL CLEARANCE
28.INSPECT 5TH GEAR RADIAL CLEARANCE
29.INSPECT 4TH GEAR RADIAL CLEARANCE
30.INSPECT 3RD GEAR RADIAL CLEARANCE