33321N
1.INSTALL FRONT OUTPUT SHAFT BEARING (INNER RACE)
Using SST and a press, install a new front output shaft bearing (inner race) to the output shaft.
Do not deform the front output shaft bearing (inner race) cage.
33345
2.INSTALL 1ST GEAR BUSHING
Coat the 1st gear bushing with gear oil and install it to the output shaft.
Coat the 1st gear needle roller bearing with gear oil and install it to the 1st gear bushing.
33335
3.INSTALL 1ST GEAR
Coat the 1st gear needle roller bearing with gear oil and install it to the 1st gear.
Coat the 1st gear with gear oil and install it to the output shaft.
33037B
4.INSTALL NO. 1 SYNCHRONIZER RING SET (for 1st Gear)
Coat the 1st gear cone and No. 1 synchronizer ring set (inner ring, middle ring and outer ring) with gear oil.
| *a | Inner Ring |
| *b | Middle Ring |
| *c | Outer Ring |
Install the inner ring to the 1st gear.
Install the middle ring to the 1st gear.
Align the protrusions of the middle ring with the cutouts of the 1st gear.
Install the outer ring to the 1st gear.
Align the protrusions of the inner ring with the cutouts of the outer ring.
33348
5.INSTALL 1ST GEAR THRUST WASHER
Install the 1st gear thrust washer to the No. 1 output shaft.
33361
6.INSTALL NO. 1 TRANSMISSION CLUTCH HUB
Install the No. 1 transmission clutch hub to the No. 1 transmission hub sleeve.
Install the 3 No. 1 synchromesh shifting keys to the No. 1 transmission clutch hub.
Install the No. 1 transmission clutch hub together with the No. 1 transmission hub sleeve and 3 No. 1 synchromesh shifting keys to the output shaft.
Align the protrusions of the outer ring with the cutouts of the No. 1 transmission clutch hub.
33037B
7.INSTALL NO. 1 SYNCHRONIZER RING SET (for 2nd Gear)
Coat the No. 1 synchronizer ring set (inner ring, middle ring and outer ring) with gear oil.
Install the outer ring to the No. 1 transmission clutch hub.
Align the protrusions of the outer ring with the cutouts of the No. 1 transmission clutch hub.
Install the middle ring to the outer ring.
Install the inner ring to the middle ring.
Align the protrusions of the inner ring with the cutouts of the outer ring.
33356A
8.INSTALL INNER 2ND GEAR BEARING RACE
Install the inner 2nd gear bearing race lock ball to the output shaft.
Coat the inner 2nd gear bearing race with gear oil and install it to the output shaft.
Align the inner 2nd gear bearing race lock ball with the groove of the inner 2nd gear bearing race.
33332
9.INSTALL 2ND GEAR
Coat the 2nd gear with gear oil and install it to the output shaft.
Align the protrusions of the middle ring with the cutouts of the 2nd gear.
33423A
10.INSTALL 3RD DRIVEN GEAR
Using SST and a press, install the 3rd driven gear to the output shaft.
33431C
11.INSTALL OUTPUT GEAR SPACER (between 4th driven gear and 3rd driven gear)
Install the output gear spacer to the output shaft.
33422B
12.INSTALL 4TH DRIVEN GEAR
Using SST and a press, install the 4th driven gear to the output shaft.
33428C
13.INSTALL 5TH DRIVEN GEAR
Using SST and a press, install the 5th driven gear to the output shaft.
33431C
14.INSTALL OUTPUT GEAR SPACER (between 6th driven gear and 5th driven gear)
Install the output gear spacer to the output shaft.
33429B
15.INSTALL 6TH DRIVEN GEAR
Using SST and a press, install the 6th driven gear to the output shaft.
33321A
16.INSTALL REAR OUTPUT SHAFT BEARING (INNER RACE)
Using SST and a press, install a new rear output shaft bearing (inner race) to the output shaft.
Do not deform the rear output shaft bearing (inner race) cage.
17.INSPECT 1ST GEAR THRUST CLEARANCE
18.INSPECT 2ND GEAR THRUST CLEARANCE
19.INSPECT 1ST GEAR RADIAL CLEARANCE
20.INSPECT 2ND GEAR RADIAL CLEARANCE