The skid control ECU (brake booster with master cylinder assembly) is connected to the combination meter assembly via CAN communication.
When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Select the Active Test on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Brake Warning Light | Brake warning light / red (malfunction) | Warning light ON/OFF | Observe combination meter assembly |
Select the Data List on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Brake Warning Light | Brake warning light / red (malfunction) | ON or OFF | ON: Warning light on
OFF: Warning light off |
- |
| Active Test Display |
|---|
| Brake Warning Light |
| Data List Display |
|---|
| Brake Warning Light |
Check the operating condition of the brake warning light / red (malfunction) when operating it using the GTS.
| Result | Proceed to |
|---|---|
| Brake warning light / red (malfunction) in the Data List does not change using the Active Test. | A |
| Brake warning light / red (malfunction) in the Data List turns ON/OFF using the Active Test. | B |
A
for LHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE BOOSTER (for LHD without Vacuum Brake Booster)>REMOVAL
for RHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE BOOSTER (for RHD without Vacuum Brake Booster)>REMOVAL
B
Turn the power switch off.
Perform the Active Test of the combination meter assembly (meter CPU) using the GTS.
Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST
| Tester Display |
|---|
| Brake Warning |
Check the combination meter assembly.
The brake warning light / red (malfunction) turns on or off in accordance with the GTS operation.
| Proceed to |
|---|
| OK |
| NG |
OK
for LHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE BOOSTER (for LHD without Vacuum Brake Booster)>REMOVAL
for RHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE BOOSTER (for RHD without Vacuum Brake Booster)>REMOVAL
NG
Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING