Troubleshooting for when ABS operates too soon due to a noisy signal from the speed sensor, a difference in output, etc.
Turn the power switch off.
Perform the sensor check in Test Mode Procedure.
| Tester Display |
|---|
| Signal Check |
Speed sensor Test Mode DTCs are cleared.
| Result | Proceed to |
|---|---|
| OK (for Front) | A |
| OK (for Rear) | B |
| NG | C |
When cleaning the front speed sensor, make sure to clean the installation hole before installation.
Do not use parts cleaner when cleaning the front speed sensor rotor.
The rear speed sensor and rear speed sensor rotor are incorporated into the rear axle hub and bearing assembly.
If the rear speed sensor and rear speed sensor rotor need to be replaced, replace the rear axle hub and bearing assembly.
A
B
C