This DTC is stored when the parking assist ECU detects a signal indicating a malfunction in the television camera assembly via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C2A63 | Back Camera Internal Circuit | A signal indicating a malfunction in the television camera assembly RH is detected. | Television camera assembly |
When "!" mark is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.
Clear the DTCs.
Check for DTCs.
DTC C2A63 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG