Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (for Gasoline Model with Occupant Classification System) › 2018.10–2020.08
RM3620E _58 Vehicle Interior _076036 SUPPLEMENTAL RESTRAINT SYSTEMS _0379920 AIRBAG SYSTEM(for Gasoline Model with Occupant Classification System) C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(for Gasoline Model with Occupant Classification System)  B167A  Front Door Pressure Sensor LH  B167E  Front Door Pressure Sensor Threshold Malfunction (LH)  


DESCRIPTION

The side collision sensor LH circuit consists of the airbag sensor assembly, side airbag pressure sensor LH and No. 2 side airbag sensor assembly LH.

The side airbag pressure sensor LH detects impacts to the vehicle and send signals to the airbag sensor assembly to determine if the SRS should be deployed.

These DTCs are stored when a malfunction is detected in the side airbag pressure sensor LH or airbag sensor assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode
B167A Front Door Pressure Sensor LH Either condition is met:
·

A side airbag pressure sensor LH malfunction.

·

An airbag sensor assembly malfunction.


·

Side airbag pressure sensor LH

·

Airbag sensor assembly


Comes on Not applicable
B167E Front Door Pressure Sensor Threshold Malfunction (LH) Either condition is met:
·

A side airbag pressure sensor LH malfunction.

·

An airbag sensor assembly malfunction.


·

Side airbag pressure sensor LH

·

Airbag sensor assembly


Comes on Not applicable

WIRING DIAGRAM

C401868E26
5.375,2.083 7.01,2.323 1.635,0.24 10 false Airbag Sensor Assembly 5.375,1.927 6.208,2.125 0.833,0.198 10 false N21 5.677,0.875 6.51,1.073 0.833,0.198 10 false BBL+ 5.698,1.458 6.531,1.656 0.833,0.198 10 false BBL- 5.406,0.76 6.24,0.958 0.833,0.198 10 false 32 5.406,1.365 6.24,1.563 0.833,0.198 10 false 31 1.615,0.75 2.448,0.948 0.833,0.198 10 false 4 1.635,1.313 2.469,1.51 0.833,0.198 10 false 3 1.146,0.854 1.979,1.052 0.833,0.198 10 false BCL+ 1.104,1.469 1.938,1.667 0.833,0.198 10 false BCL- 1.135,2.792 1.969,2.99 0.833,0.198 10 false BDL+ 1.146,3.333 1.979,3.531 0.833,0.198 10 false BDL- 1.604,2.688 2.438,2.885 0.833,0.198 10 false 1 1.594,3.24 2.427,3.438 0.833,0.198 10 false 2 4.083,2.813 4.917,3.01 0.833,0.198 10 false BDL+ 4.094,3.354 4.927,3.552 0.833,0.198 10 false BDL- 0.552,3.969 2.177,4.354 1.625,0.385 10 false No. 2 Side Airbag Sensor Assembly LH 0.542,3.813 1.302,4.146 0.76,0.333 10 false N22 4.01,3.979 6.094,4.188 2.083,0.208 10 false Side Airbag Pressure Sensor LH 4.021,3.823 4.781,4.156 0.76,0.333 10 false J9 2.698,3.344 3.458,3.677 0.76,0.333 10 false JN2 2.708,2.813 3.469,3.146 0.76,0.333 10 false JN2 2.781,3.156 3.615,3.354 0.833,0.198 10 false 2 2.781,2.594 3.615,2.792 0.833,0.198 10 false 1 3.906,2.719 4.74,2.917 0.833,0.198 10 false 2 3.906,3.26 4.74,3.458 0.833,0.198 10 false 1 2.698,2.99 3.531,3.188 0.833,0.198 10 false BDL+ 2.688,3.563 3.521,3.76 0.833,0.198 10 false BDL-

CAUTION / NOTICE / HINT

NOTICE:
·

When disconnecting the cable from the negative (-) battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

·

After replacing the airbag sensor assembly, refer to initialization.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



PROCEDURE

1.CHECK SIDE AIRBAG PRESSURE SENSOR LH
a.
C238395C23
0.719,1.531 1.51,2.167 0.792,0.635 10 false *1 2.573,1.51 2.927,1.917 0.354,0.406 10 false *2
*1 Side Airbag Pressure Sensor RH
*2 No. 2 Side Airbag Sensor Assembly LH


Turn the engine switch off.


b.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


c.

Interchange the side airbag pressure sensor LH with RH and connect the connectors to them.


d.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.


e.

Turn the engine switch on (IG), and wait for at least 60 seconds.


f.

Clear the DTCs stored in memory.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for Gasoline Model with Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

g.

Turn the engine switch off.


h.

Turn the engine switch on (IG), and wait for at least 60 seconds.


i.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for Gasoline Model with Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188
Result:
Proceed to
DTC B167A or B167E is output
DTC B166C or B166F is output
DTCs B166C, B166F, B167A and B167E are not output


HINT:

Codes other than DTCs B166C, B166F, B167A and B167E may be output at this time, but they are not related to this check.



j.

Turn the engine switch off.


k.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


l.

Return the side airbag pressure sensor RH and LH to their original positions and connect the connectors to them.



DTC B167A or B167E is output

DTC B166C or B166F is output

DTCs B166C, B166F, B167A and B167E are not output