If a hybrid vehicle control ECU assembly that is incompatible with the immobiliser function is installed, the hybrid vehicle control ECU assembly will store this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B279C95 | Engine Immobiliser System Incorrect Assembly | A hybrid vehicle control ECU assembly that is incompatible with the immobiliser function is installed (1-trip detection logic*). | Hybrid vehicle control ECU assembly | - |
*: Only detected while a malfunction is present.
| Vehicle Condition when Malfunction Detected | Fail-safe Function when Malfunction Detected |
|---|---|
| Hybrid control system cannot be started | - |
| DTC No. | Data List and Active Test |
|---|---|
| B279C95 | - |
Before replacing the hybrid vehicle control ECU assembly, refer to the Service Bulletin.
Replace the hybrid vehicle control ECU assembly with a new one.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID VEHICLE CONTROL ECU>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT