This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
11102A
2.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor.
If the camshaft position sensor has been struck or dropped, replace it.
11102A
3.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor.
If the camshaft position sensor has been struck or dropped, replace it.