Home › Engine / Hybrid System › A25B-FXS (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR › from 2019.02
RM3620E _51 Engine / Hybrid System _080116 A25B-FXS ENGINE CONTROL _0389141 CRANKSHAFT POSITION SENSOR A

A25B-FXS ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 17750A 1.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 11401G 2.REMOVE CRANKSHAFT POSITION SENSOR

a.
A424116

Disconnect the crankshaft position sensor connector.


b.

Remove the bolt and crankshaft position sensor.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.