Home › Engine / Hybrid System › A25B-FXS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2019.02
RM3620E _51 Engine / Hybrid System _080116 A25B-FXS ENGINE CONTROL _0389143 ENGINE COOLANT TEMPERATURE SENSOR A

A25B-FXS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>A25B-FXS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


PROCEDURE

Hide 89422A 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>A25B-FXS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.


b.

Insert the engine coolant temperature sensor to the end of the water outlet and secure it with a new clip.

NOTICE:
·

If the engine coolant temperature sensor has been struck or dropped, replace it.

·

If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.




c.

Connect the engine coolant temperature sensor connector.