Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM (for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY) › from 2019.02
RM3620E _51 Engine / Hybrid System _076333 HYBRID / BATTERY CONTROL _0390716 HYBRID CONTROL SYSTEM(for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY) C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM(for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY)  P301100  Hybrid/EV Battery Block 1 Circuit Resistance Out of Range (Extreme)  P30111E  Hybrid/EV Battery Block 1 Circuit Resistance Out of Range  P301200  Hybrid/EV Battery Block 2 Circuit Resistance Out of Range (Extreme)  P30121E  Hybrid/EV Battery Block 2 Circuit Resistance Out of Range  P301300  Hybrid/EV Battery Block 3 Circuit Resistance Out of Range (Extreme)  P30131E  Hybrid/EV Battery Block 3 Circuit Resistance Out of Range  P301400  Hybrid/EV Battery Block 4 Circuit Resistance Out of Range (Extreme)  P30141E  Hybrid/EV Battery Block 4 Circuit Resistance Out of Range  P301500  Hybrid/EV Battery Block 5 Circuit Resistance Out of Range (Extreme)  P30151E  Hybrid/EV Battery Block 5 Circuit Resistance Out of Range  P301600  Hybrid/EV Battery Block 6 Circuit Resistance Out of Range (Extreme)  P30161E  Hybrid/EV Battery Block 6 Circuit Resistance Out of Range  P301700  Hybrid/EV Battery Block 7 Circuit Resistance Out of Range (Extreme)  P30171E  Hybrid/EV Battery Block 7 Circuit Resistance Out of Range  P301800  Hybrid/EV Battery Block 8 Circuit Resistance Out of Range (Extreme)  P30181E  Hybrid/EV Battery Block 8 Circuit Resistance Out of Range  P301900  Hybrid/EV Battery Block 9 Circuit Resistance Out of Range (Extreme)  P30191E  Hybrid/EV Battery Block 9 Circuit Resistance Out of Range  P302000  Hybrid/EV Battery Block 10 Circuit Resistance Out of Range (Extreme)  P30201E  Hybrid/EV Battery Block 10 Circuit Resistance Out of Range  P302100  Hybrid/EV Battery Block 11 Circuit Resistance Out of Range (Extreme)  P30211E  Hybrid/EV Battery Block 11 Circuit Resistance Out of Range  


DESCRIPTION

Refer to the description for DTC P1AC000.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY)>P1AC000

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P301100 Hybrid/EV Battery Block 1 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30111E Hybrid/EV Battery Block 1 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301200 Hybrid/EV Battery Block 2 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30121E Hybrid/EV Battery Block 2 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301300 Hybrid/EV Battery Block 3 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30131E Hybrid/EV Battery Block 3 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301400 Hybrid/EV Battery Block 4 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30141E Hybrid/EV Battery Block 4 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301500 Hybrid/EV Battery Block 5 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30151E Hybrid/EV Battery Block 5 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301600 Hybrid/EV Battery Block 6 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30161E Hybrid/EV Battery Block 6 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301700 Hybrid/EV Battery Block 7 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30171E Hybrid/EV Battery Block 7 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301800 Hybrid/EV Battery Block 8 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30181E Hybrid/EV Battery Block 8 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P301900 Hybrid/EV Battery Block 9 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30191E Hybrid/EV Battery Block 9 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P302000 Hybrid/EV Battery Block 10 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30201E Hybrid/EV Battery Block 10 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P302100 Hybrid/EV Battery Block 11 Circuit Resistance Out of Range (Extreme) An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is extremely higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on
P30211E Hybrid/EV Battery Block 11 Circuit Resistance Out of Range An internal malfunction of the HV battery is detected. The difference in the internal resistance of each battery block is higher than the specified value.
(1 trip detection logic)
·

HV battery

·

Hybrid battery terminal block

·

Battery voltage sensor


Comes on Master Warning:
Comes on

HINT:
·

These DTCs can be stored after clearing DTCs and driving the vehicle for approximately 10 minutes.

·

These DTCs are stored when a malfunction is detected in the HV battery or a battery voltage sensor. However, depending on the driving conditions, the malfunction may not be reproduced if the condition of the HV battery changes.

(a)

When the HV battery is malfunctioning:

- Voltage of 1 or more of the battery blocks has dropped.

- Voltage of all battery blocks is output randomly with no certain pattern.


(b)

When the battery voltage sensor is malfunctioning:

- While current is flowing to or from the HV battery, the voltage of a specific HV battery block will fluctuates.



·

In order to ensure HV battery performance, appropriate cooling performance must be maintained. Perform the following items as necessary. If cooling performance has decreased and "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, make sure to perform the following items:

-

Make sure the air intake port is not blocked.

-

Make sure there are no gaps between the connecting parts of the ducts.

-

Clean the No. 1 HV battery intake filter.

Clear the DTCs to reset the learning values even if no DTCs are stored.





Related Data List
DTC No. Data List
P301100
·

Hybrid Battery Block 1 to 11 Voltage *1

·

Internal Resistance 1 to 11


P30111E
P301200
P30121E
P301300
P30131E
P301400
P30141E
P301500
P30151E
P301600
P30161E
P301700
P30171E
P301800
P30181E
P301900
P30191E
P302000
P30201E
P302100
P30211E

HINT:
·

*1: Under normal conditions, the values of Hybrid Battery Block 1, 2, 9, 10 and 11 Voltage will be approximately 16 V and Hybrid Battery Block 3, 4, 5, 6, 7 and 8 Voltage will be approximately 32 V.

·

If there is a short or open in a battery block voltage detection line, the value of Hybrid Battery Block Voltage for the corresponding battery block will be lower than 8 V.

·

The Data List items Internal Resistance 1 to 11 indicate internal resistance correction values used by the hybrid vehicle control ECU assembly to detect malfunctions of the HV battery.



The following items can be helpful when performing repairs:

Data List
·

Ready Signal

·

Vehicle Speed

·

Accelerator Position

·

Shift Position

·

Engine Speed

·

Hybrid Battery Voltage

·

Hybrid Battery Current

·

BATT Voltage

·

Hybrid Battery SOC just after IG-ON

·

Hybrid Battery Maximum SOC

·

Hybrid Battery Minimum SOC

·

Total Distance Traveled

·

Distance from DTC Cleared

·

Engine Run Time


Vehicle Control History Data

Hybrid Battery Voltage Low


CONFIRMATION DRIVING PATTERN

HINT:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY)>UTILITY


1.

Connect the GTS to the DLC3.

2.

Turn the power switch on (IG) and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the power switch off and wait for 2 minutes or more.

5.

Turn the power switch on (IG) and turn the GTS on.

6.

Drive the vehicle on urban roads for approximately 10 minutes.

HINT:

This DTC may not be stored if the vehicle is stopped or being driven at a constant speed.


7.

Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

8.

Check the DTC judgment result.

HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE, perform driving pattern again.




CAUTION / NOTICE / HINT

CAUTION:
·
A340358

Before the following operations are conducted, take precautions to prevent electric shock by turning the power switch off, wearing insulated gloves, and removing the service plug grip from HV battery.

-

Inspecting the high-voltage system

-

Disconnecting the low voltage connector of the inverter with converter assembly

-

Disconnecting the low voltage connector of the HV battery


·
A357588

To prevent electric shock, make sure to remove the service plug grip to cut off the high voltage circuit before servicing the vehicle.

·
A358042

After removing the service plug grip from the HV battery, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.

·
A357589C02
1.573,0.74 2.021,0.427 true 2.094,0.344 2.354,0.51 0.26,0.167 10 false *a
*a Without waiting for 10 minutes


After removing the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals. After waiting for 10 minutes, check the voltage at the terminals in the inspection point in the inverter with converter assembly. The voltage should be 0 V before beginning work.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY)>PRECAUTION

HINT:

Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.


·

Make sure to insulate the high-voltage connectors and terminals of the HV battery with insulating tape after removing it.

If the HV battery stored without insulating the connectors and terminals, electric shock or fire may result.

·
A358021C02
0.531,4.146 0.844,4.344 0.313,0.198 10 false *a 2.74,4.146 3.052,4.344 0.313,0.198 10 false *b
*a Dealer
*b Battery Collection Agent


When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

-

Accidents such as electric shock may result if the HV battery is disposed of improperly or abandoned. Therefore, make sure to return all HV batteries through an authorized collection agent.


·
A358020

After removing the HV battery, keep it away from water. Exposure to water may cause the HV battery to produce heat, resulting in a fire.



NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

1.CHECK DTC OUTPUT (HYBRID CONTROL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Check for DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 397

Result:
Result Proceed to
"P0AFC00, P0AFC96, P308A12 or P0AFC62" is not output. A
"P0AFC00, P0AFC96, P308A12 or P0AFC62" is also output. B


e.

Turn the power switch off.



A

2.CHECK FREEZE FRAME DATA

B

2.CHECK FREEZE FRAME DATA

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY)>P1AC000

Result:
Result Proceed to
On the HV battery blocks 3 to 8, one of the conditions in the table above is met. A
Other than above B



A

3.CHECK TOTAL DISTANCE DRIVEN

B

5.CHECK FREEZE FRAME DATA
3.CHECK TOTAL DISTANCE DRIVEN
a.

Read the odometer to check the total distance the vehicle has been driven.


Result:
Result Proceed to
Total distance driven is less than 200000 km (124280 mile) A
Total distance driven is 200000 km (124280 mile) or more Current total distance driven - total distance driven when hybrid battery terminal block replaced = less than 200000 km (124280 mile) *1
Other than above B


HINT:

*1: If the hybrid battery terminal block has been replaced, use the total distance driven since it was replaced.



A

B

4.REPLACE HV BATTERY
5.CHECK FREEZE FRAME DATA

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY)>P1AC000

Result:
Result Proceed to
Either of the following conditions is met:
1. All conditions in table 1 are met.
2. All conditions in table 2 are met.
A
Other than above B



A

B

6.READ VALUE USING GTS (HYBRID BATTERY BLOCK VOLTAGE)
6.READ VALUE USING GTS (HYBRID BATTERY BLOCK VOLTAGE)

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY)>P1CBE1E

Result:
Result Proceed to
All conditions in Table 1, Table 2 or Table 3 are met. A
Other than above B



A

B

7.CHECK DTC OUTPUT (HYBRID CONTROL)
7.CHECK DTC OUTPUT (HYBRID CONTROL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Check for DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 397

Result:
Result Proceed to
P1CFD1E, P302100 or P30211E is not output. A
P1CFD1E, P302100 or P30211E is output. B


e.

Turn the power switch off.



A

8.CHECK TOTAL DISTANCE DRIVEN

B

10.REPLACE HV BATTERY
8.CHECK TOTAL DISTANCE DRIVEN
a.

Read the odometer to check the total distance the vehicle has been driven.


Result:
Result Proceed to
Total distance driven is less than 200000 km (124280 mile) A
Total distance driven is 200000 km (124280 mile) or more Current total distance driven - total distance driven when hybrid battery terminal block replaced = less than 200000 km (124280 mile) *1
Other than above B


HINT:

*1: If the hybrid battery terminal block has been replaced, use the total distance driven since it was replaced.



A

B

9.REPLACE HV BATTERY