Home › Vehicle Exterior › DOOR / HATCH › HOOD › from 2019.09
RM3620E _59 Vehicle Exterior _076335 DOOR / HATCH _0372561 HOOD A

DOOR / HATCH  HOOD  DISASSEMBLY  


PROCEDURE

Hide 53341B 1.REMOVE HOOD INSULATOR

a.
B521968

Using a clip remover, remove the 6 clips.


b.

Detach the guide and remove the hood insulator.


Hide 85035 2.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)

HINT:

Use the same procedure for the RH and LH sides.

Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE>REMOVAL


Hide 85035 3.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ Heater)

HINT:

Use the same procedure for the RH and LH sides.

Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE>REMOVAL


Hide 85372 4.DISCONNECT WINDSHIELD WASHER HOSE (w/o Heater)

a.
B521969

Detach the clamp and disconnect the windshield washer hose.


Hide 85372 5.DISCONNECT WINDSHIELD WASHER HOSE (w/ Heater)

a.
B529368

Detach the clamp and disconnect the windshield washer hose.


Hide 53452 6.REMOVE HOOD STAY HOLDER

a.
B521970

Using a thin-bladed screwdriver, detach the claw and remove the hood stay holder.

HINT:

Tape the thin-bladed screwdriver tip before use.