Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY) › from 2020.05
RM3620E _51 Engine / Hybrid System _076333 HYBRID / BATTERY CONTROL _0425055 HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY) C

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY)  P1A001C  Hybrid Battery Stack 2 Cell Voltage Detection Voltage Out of Range  P301A1C  Hybrid Battery Stack 1 Cell Voltage Detection Voltage Out of Range  


DESCRIPTION

The HV battery is composed of 70 cells (3.6 V each) in series. The battery ECU assembly monitors the voltage of each HV battery cell to detect malfunctions of the HV battery.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1A001C Hybrid Battery Stack 2 Cell Voltage Detection Voltage Out of Range An open is detected in the HV battery cell voltage detection circuits of the No. 2 HV supply stack sub-assembly.
(1 trip detection logic)
·

No. 2 HV supply stack sub-assembly

·

Battery ECU assembly


Comes on Master Warning:
Comes on
P301A1C Hybrid Battery Stack 1 Cell Voltage Detection Voltage Out of Range An open is detected in the HV battery cell voltage detection circuits of the No. 1 HV supply stack sub-assembly.
(1 trip detection logic)
·

No. 1 HV supply stack sub-assembly

·

Battery ECU assembly


Comes on Master Warning:
Comes on

Related Data List
DTC No. Data List
P1A001C Hybrid/EV Battery Cell 1 to 70 Voltage
P301A1C

CONFIRMATION DRIVING PATTERN

HINT:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY)>UTILITY


1.

Connect the GTS to the DLC3.

2.

Turn the power switch on (IG) and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the power switch off and wait for 2 minutes or more.

5.

Turn the power switch on (IG) and turn the GTS on.

6.

With power switch on (IG) and wait for 10 seconds or more.

7.

Enter the following menus: Powertrain / HV Battery / Utility / All Readiness.

8.

Check the DTC judgment result.

HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE, perform driving pattern again.




WIRING DIAGRAM

A404423E03
5.479,0.333 6.125,0.698 0.646,0.365 10 false VA35 5.479,0.573 6.125,0.938 0.646,0.365 10 false VA34 5.479,0.833 6.125,1.198 0.646,0.365 10 false VA33 5.479,1.083 6.125,1.448 0.646,0.365 10 false VA32 5.479,1.333 6.125,1.698 0.646,0.365 10 false VA31 5.479,1.563 6.125,1.927 0.646,0.365 10 false VA30 5.479,1.823 6.125,2.188 0.646,0.365 10 false VA29 5.49,2.073 6.135,2.438 0.646,0.365 10 false VA28 5.49,2.302 6.135,2.667 0.646,0.365 10 false VA27 5.479,2.552 6.125,2.917 0.646,0.365 10 false VA26 5.49,2.792 6.135,3.156 0.646,0.365 10 false VA25 5.49,3.042 6.135,3.406 0.646,0.365 10 false VA24 5.479,3.313 6.125,3.677 0.646,0.365 10 false VA23 5.49,3.563 6.135,3.927 0.646,0.365 10 false VA22 5.479,3.813 6.125,4.177 0.646,0.365 10 false VA21 5.479,4.052 6.125,4.417 0.646,0.365 10 false VA20 5.49,4.302 6.135,4.667 0.646,0.365 10 false VA19 5.479,4.573 6.125,4.938 0.646,0.365 10 false VA18 5.479,4.823 6.125,5.188 0.646,0.365 10 false VA17 5.49,5.052 6.135,5.417 0.646,0.365 10 false VA16 5.5,5.302 6.146,5.667 0.646,0.365 10 false VA15 5.49,5.542 6.135,5.906 0.646,0.365 10 false VA14 5.49,5.781 6.135,6.146 0.646,0.365 10 false VA13 5.49,6.01 6.135,6.375 0.646,0.365 10 false VA12 5.49,6.26 6.135,6.625 0.646,0.365 10 false VA11 5.49,6.51 6.135,6.875 0.646,0.365 10 false VA10 5.49,6.76 6.135,7.125 0.646,0.365 10 false VA9 5.5,7 6.146,7.365 0.646,0.365 10 false VA8 5.49,7.229 6.135,7.594 0.646,0.365 10 false VA7 5.479,7.469 6.125,7.833 0.646,0.365 10 false VA6 5.479,7.708 6.125,8.073 0.646,0.365 10 false VA5 5.49,7.958 6.135,8.323 0.646,0.365 10 false VA4 5.49,8.198 6.135,8.563 0.646,0.365 10 false VA3 5.49,8.448 6.135,8.813 0.646,0.365 10 false VA2 5.49,8.698 6.135,9.063 0.646,0.365 10 false VA1 5.49,8.99 6.135,9.354 0.646,0.365 10 false GA0 5.083,9.5 6.875,9.781 1.792,0.281 10 false z29 Battery ECU Assembly 1.51,9.458 3.854,9.719 2.344,0.26 10 false No. 1 HV Supply Stack Sub-assembly 5.198,0.24 5.844,0.604 0.646,0.365 10 false 36 5.198,0.469 5.844,0.833 0.646,0.365 10 false 24 5.188,0.729 5.833,1.094 0.646,0.365 10 false 12 5.188,1.229 5.833,1.594 0.646,0.365 10 false 23 5.198,0.99 5.844,1.354 0.646,0.365 10 false 35 5.198,1.479 5.844,1.844 0.646,0.365 10 false 11 5.188,1.729 5.833,2.094 0.646,0.365 10 false 34 5.188,1.969 5.833,2.333 0.646,0.365 10 false 22 5.188,2.219 5.833,2.583 0.646,0.365 10 false 10 5.177,2.458 5.823,2.823 0.646,0.365 10 false 33 5.198,2.698 5.844,3.063 0.646,0.365 10 false 21 5.271,2.958 5.917,3.323 0.646,0.365 10 false 9 5.188,3.219 5.833,3.583 0.646,0.365 10 false 32 5.188,3.469 5.833,3.833 0.646,0.365 10 false 20 5.26,3.719 5.906,4.083 0.646,0.365 10 false 8 5.198,3.958 5.844,4.323 0.646,0.365 10 false 31 5.198,4.219 5.844,4.583 0.646,0.365 10 false 19 5.271,4.469 5.917,4.833 0.646,0.365 10 false 7 5.198,4.719 5.844,5.083 0.646,0.365 10 false 30 5.198,4.958 5.844,5.323 0.646,0.365 10 false 18 5.177,5.448 5.823,5.813 0.646,0.365 10 false 29 5.25,5.208 5.896,5.573 0.646,0.365 10 false 6 5.188,5.698 5.833,6.063 0.646,0.365 10 false 17 5.25,5.938 5.896,6.302 0.646,0.365 10 false 5 5.198,6.188 5.844,6.552 0.646,0.365 10 false 28 5.188,6.427 5.833,6.792 0.646,0.365 10 false 16 5.26,6.677 5.917,6.917 0.656,0.24 10 false 4 5.188,6.917 5.833,7.281 0.646,0.365 10 false 27 5.177,7.156 5.823,7.521 0.646,0.365 10 false 15 5.26,7.396 5.917,7.635 0.656,0.24 10 false 3 5.177,7.646 5.823,8.01 0.646,0.365 10 false 26 5.188,7.885 5.833,8.25 0.646,0.365 10 false 14 5.26,8.125 5.917,8.365 0.656,0.24 10 false 2 5.188,8.375 5.833,8.74 0.646,0.365 10 false 25 5.188,8.625 5.833,8.99 0.646,0.365 10 false 13 5.26,8.917 5.917,9.156 0.656,0.24 10 false 1

A404422E03
5.469,0.385 6.188,0.75 0.719,0.365 10 false VA70 5.469,0.656 6.188,1.021 0.719,0.365 10 false VA69 5.469,0.906 6.188,1.271 0.719,0.365 10 false VA68 5.469,1.156 6.188,1.521 0.719,0.365 10 false VA67 5.469,1.396 6.188,1.76 0.719,0.365 10 false VA66 5.469,1.667 6.188,2.031 0.719,0.365 10 false VA65 5.469,1.875 6.188,2.24 0.719,0.365 10 false VA64 5.469,2.125 6.188,2.49 0.719,0.365 10 false VA63 5.469,2.365 6.188,2.729 0.719,0.365 10 false VA62 5.469,2.615 6.188,2.979 0.719,0.365 10 false VA61 5.469,2.875 6.188,3.24 0.719,0.365 10 false VA60 5.469,3.135 6.188,3.5 0.719,0.365 10 false VA59 5.469,3.385 6.188,3.75 0.719,0.365 10 false VA58 5.469,3.635 6.188,4 0.719,0.365 10 false VA57 5.469,3.875 6.188,4.24 0.719,0.365 10 false VA56 5.469,4.104 6.188,4.469 0.719,0.365 10 false VA55 5.469,4.365 6.188,4.729 0.719,0.365 10 false VA54 5.469,4.625 6.188,4.99 0.719,0.365 10 false VA53 5.469,4.875 6.188,5.24 0.719,0.365 10 false VA52 5.469,5.115 6.188,5.479 0.719,0.365 10 false VA51 5.469,5.375 6.188,5.74 0.719,0.365 10 false VA50 5.469,5.615 6.188,5.979 0.719,0.365 10 false VA49 5.469,5.854 6.188,6.219 0.719,0.365 10 false VA48 5.469,6.104 6.188,6.469 0.719,0.365 10 false VA47 5.469,6.344 6.188,6.708 0.719,0.365 10 false VA46 5.469,6.583 6.188,6.948 0.719,0.365 10 false VA45 5.469,6.833 6.188,7.198 0.719,0.365 10 false VA44 5.469,7.073 6.188,7.438 0.719,0.365 10 false VA43 5.469,7.323 6.188,7.688 0.719,0.365 10 false VA42 5.469,7.563 6.188,7.927 0.719,0.365 10 false VA41 5.469,7.802 6.188,8.167 0.719,0.365 10 false VA40 5.469,8.052 6.188,8.417 0.719,0.365 10 false VA39 5.469,8.292 6.188,8.656 0.719,0.365 10 false VA38 5.469,8.542 6.188,8.906 0.719,0.365 10 false VA37 5.469,8.781 6.188,9.146 0.719,0.365 10 false VA36 5.469,9.01 6.188,9.375 0.719,0.365 10 false VAD 5.198,0.281 5.917,0.646 0.719,0.365 10 false 36 5.198,0.531 5.917,0.896 0.719,0.365 10 false 24 5.188,0.802 5.906,1.167 0.719,0.365 10 false 12 5.188,1.042 5.906,1.406 0.719,0.365 10 false 35 5.188,1.292 5.906,1.656 0.719,0.365 10 false 23 5.198,1.531 5.917,1.896 0.719,0.365 10 false 11 5.188,1.781 5.802,2.063 0.615,0.281 10 false 34 5.198,2.031 5.813,2.313 0.615,0.281 10 false 22 5.198,2.26 5.813,2.542 0.615,0.281 10 false 10 5.198,2.51 5.813,2.792 0.615,0.281 10 false 33 5.208,2.771 5.823,3.052 0.615,0.281 10 false 21 5.26,3.042 5.875,3.323 0.615,0.281 10 false 9 5.188,3.292 5.802,3.573 0.615,0.281 10 false 32 5.188,3.531 5.802,3.813 0.615,0.281 10 false 20 5.26,3.781 5.875,4.063 0.615,0.281 10 false 8 5.208,4.031 5.823,4.313 0.615,0.281 10 false 31 5.188,4.281 5.802,4.563 0.615,0.281 10 false 19 5.26,4.531 5.875,4.813 0.615,0.281 10 false 7 5.198,4.771 5.813,5.052 0.615,0.281 10 false 30 5.188,5.021 5.802,5.302 0.615,0.281 10 false 18 5.25,5.26 5.865,5.542 0.615,0.281 10 false 6 5.188,5.51 5.802,5.792 0.615,0.281 10 false 29 5.177,5.75 5.792,6.031 0.615,0.281 10 false 17 5.24,6 5.854,6.281 0.615,0.281 10 false 5 5.188,6.24 5.802,6.521 0.615,0.281 10 false 28 5.188,6.5 5.802,6.781 0.615,0.281 10 false 16 5.26,6.74 5.875,7.021 0.615,0.281 10 false 4 5.188,6.969 5.802,7.25 0.615,0.281 10 false 27 5.177,7.208 5.792,7.49 0.615,0.281 10 false 15 5.26,7.448 5.875,7.729 0.615,0.281 10 false 3 5.188,7.698 5.802,7.979 0.615,0.281 10 false 26 5.188,7.948 5.802,8.229 0.615,0.281 10 false 14 5.25,8.188 5.865,8.469 0.615,0.281 10 false 2 5.188,8.438 5.802,8.719 0.615,0.281 10 false 25 5.188,8.688 5.802,8.969 0.615,0.281 10 false 13 5.25,8.927 5.865,9.208 0.615,0.281 10 false 1 1.396,9.427 4.25,9.729 2.854,0.302 10 false No. 2 HV Supply Stack Sub-assembly 4.948,9.51 6.875,9.823 1.927,0.313 10 false z27 Battery ECU Assembly

CAUTION / NOTICE / HINT

CAUTION:
·
A340358

Before the following operations are conducted, take precautions to prevent electric shock by turning the power switch off, wearing insulated gloves, and removing the service plug grip from HV battery.

-

Inspecting the high-voltage system

-

Disconnecting the low voltage connector of the inverter with converter assembly

-

Disconnecting the low voltage connector of the HV battery


·
A357588

To prevent electric shock, make sure to remove the service plug grip to cut off the high voltage circuit before servicing the vehicle.

·
A358042

After removing the service plug grip from the HV battery, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.

·
A357589C02
1.573,0.74 2.021,0.427 true 2.094,0.344 2.354,0.51 0.26,0.167 10 false *a
*a Without waiting for 10 minutes


After removing the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals. After waiting for 10 minutes, check the voltage at the terminals in the inspection point in the inverter with converter assembly. The voltage should be 0 V before beginning work.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY)>PRECAUTION

HINT:

Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.


·

Make sure to insulate the high-voltage connectors and terminals of the HV battery with insulating tape after removing it.

If the HV battery stored without insulating the connectors and terminals, electric shock or fire may result.

·
A358021C02
0.531,4.146 0.844,4.344 0.313,0.198 10 false *a 2.74,4.146 3.052,4.344 0.313,0.198 10 false *b
*a Dealer
*b Battery Collection Agent


When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

-

Accidents such as electric shock may result if the HV battery is disposed of improperly or abandoned. Therefore, make sure to return all HV batteries through an authorized collection agent.


·

Before returning the HV battery, make sure to perform a recovery inspection.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HV BATTERY (for LITHIUM-ION BATTERY)>RECOVERY INSPECTION

·

Before returning the HV supply stack sub-assembly, make sure to perform a recovery inspection.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HV BATTERY STACK (for LITHIUM-ION BATTERY)>RECOVERY INSPECTION

·

Make a note of the output DTCs as some of them may be necessary for recovery inspection of the HV battery and HV supply stack sub-assemblies.

·
A358020

After removing the HV battery, keep it away from water. Exposure to water may cause the HV battery to produce heat, resulting in a fire.



NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

1.CHECK DTC OUTPUT (HV BATTERY, HYBRID CONTROL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / HV Battery and Hybrid Control / Trouble Codes.


d.

Check for DTCs.

Powertrain > HV Battery > Trouble Codes
50001 398
Powertrain > Hybrid Control > Trouble Codes
50001 397
Result:
Result Proceed to
"P1A001C or P301A1C" only is output, or DTCs except the ones in the table below are also output. A
DTCs of hybrid battery system in the table below are output. B
DTCs of hybrid control system in the table below are output. C


System Relevant DTC
Hybrid battery system P060A47 Hybrid/EV Battery Energy Control Module Monitoring Processor Watchdog / Safety MCU Failure
P060B49 Hybrid/EV Battery Energy Control Module A/D Processing Internal Electronic Failure
P060687 Hybrid/EV Battery Energy Control Module Processor to Monitoring Processor Missing Message
Hybrid control system P0A1F94 Hybrid/EV Battery Energy Control Module Unexpected Operation


e.

Turn the power switch off.



A

2.CHECK DTC

B

C

2.CHECK DTC
a.

Check the DTCs that were output when the vehicle was brought to the workshop.


Result:
Result Proceed to
"P1A001C" is also output. A
"P301A1C" is also output. B



A

3.CHECK CONNECTOR CONNECTION CONDITION (BATTERY ECU ASSEMBLY CONNECTOR)

B

6.CHECK CONNECTOR CONNECTION CONDITION (BATTERY ECU ASSEMBLY CONNECTOR)
3.CHECK CONNECTOR CONNECTION CONDITION (BATTERY ECU ASSEMBLY CONNECTOR)
CAUTION:

Be sure to wear insulated gloves and protective goggles.


a.

Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.




c.
C433535N01
1.792,0.125 2.156,0.365 0.365,0.24 1.854,0.177 2.135,0.344 0.281,0.167 10 true z27

Check the connections of the z27 battery ECU assembly connector.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>ELECTRONIC CIRCUIT INSPECTION PROCEDURE

OK:

The connector is connected securely and there are no contact problems.



d.

Install the No. 1 HV battery hose.


Result:
Result Proceed to
OK A
Not connected securely The terminals are not damaged or corroded B
Not connected securely The terminals are damaged or corroded C



A

4.CHECK FREEZE FRAME DATA

B

CONNECT SECURELY

C

4.CHECK FREEZE FRAME DATA
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / HV battery / Trouble Codes.


d.

Read the value of freeze frame data items "Hybrid/EV battery cell 36 voltage" through "Hybrid/EV battery cell 70 voltage" for DTC P1A001C and make a note if the value of any is 1.6 V or less.

Powertrain > HV Battery > Trouble Codes
50001 398

e.

Turn the power switch off.


Result:
Proceed to
NEXT



NEXT

5.CHECK NO. 2 HV SUPPLY STACK SUB-ASSEMBLY (HYBRID BATTERY CELL VOLTAGE)
5.CHECK NO. 2 HV SUPPLY STACK SUB-ASSEMBLY (HYBRID BATTERY CELL VOLTAGE)

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY)>P0E2D00

Result:
Result Proceed to
The voltage between the terminals is 1.6 V or less. A
Other than above B



A

B

6.CHECK CONNECTOR CONNECTION CONDITION (BATTERY ECU ASSEMBLY CONNECTOR)
CAUTION:

Be sure to wear insulated gloves and protective goggles.


a.

Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.




c.
C433534N01
2.073,0.375 2.417,0.635 0.344,0.26 2.125,0.417 2.406,0.604 0.281,0.188 10 true z29

Check the connections of the z29 battery ECU assembly connector.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>ELECTRONIC CIRCUIT INSPECTION PROCEDURE

OK:

The connector is connected securely and there are no contact problems.


Result:
Result Proceed to
OK A
Not connected securely The terminals are not damaged or corroded B
Not connected securely The terminals are damaged or corroded C



d.

Install the No. 1 HV battery hose.



A

7.CHECK FREEZE FRAME DATA

B

CONNECT SECURELY

C

7.CHECK FREEZE FRAME DATA
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / HV battery / Trouble Codes.


d.

Read the value of freeze frame data items "Hybrid/EV battery cell 1 voltage" through "Hybrid/EV battery cell 35 voltage" for DTC P301A1C and make a note if the value of any is 1.6 V or less.

Powertrain > HV Battery > Trouble Codes
50001 398

e.

Turn the power switch off.


Result:
Proceed to
NEXT



NEXT

8.CHECK NO. 1 HV SUPPLY STACK SUB-ASSEMBLY (HYBRID BATTERY CELL VOLTAGE)
8.CHECK NO. 1 HV SUPPLY STACK SUB-ASSEMBLY (HYBRID BATTERY CELL VOLTAGE)

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY)>P0E2D00

Result:
Result Proceed to
The voltage between the terminals is 1.6 V or less. A
Other than above B



A

B