Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for HV Model) › from 2020.05
RM3620E _57 Power Source / Network _076016 NETWORKING _0369864 CAN COMMUNICATION SYSTEM(for HV Model) J

NETWORKING  CAN COMMUNICATION SYSTEM(for HV Model)  Check Bus 2 Line for Short to GND  


DESCRIPTION

There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 18 (CA4H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 17 (CA4L) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3.

Symptom Trouble Area

*1: w/ Vehicle Proximity Notification System

*2: for LITHIUM-ION BATTERY

There is no resistance between terminal 18 (CA4H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 17 (CA4L) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3.
·

Short to GND in CAN main bus wire

·

Short to GND in CAN branch wire

·

Central gateway ECU (network gateway ECU)

·

ECM

·

Hybrid vehicle control ECU

·

Inverter with converter assembly

·

Brake booster with master cylinder assembly (skid control ECU)

·

Vehicle approaching speaker controller*1

·

Battery ECU assembly*2

·

No. 3 CAN junction connector



WIRING DIAGRAM

C434642E01
0.906,0.573 1.521,0.771 0.615,0.198 10 false CA1H 0.917,0.99 1.531,1.188 0.615,0.198 10 false CA1L 0.885,2.26 1.5,2.458 0.615,0.198 10 false CANH 0.906,2.667 1.521,2.865 0.615,0.198 10 false CANL 6.063,4.469 6.677,4.667 0.615,0.198 10 false CANL 6.042,3.885 6.656,4.083 0.615,0.198 10 false CANH 5.958,2.688 6.573,2.885 0.615,0.198 10 false CA2L 5.948,2.26 6.563,2.458 0.615,0.198 10 false CA2H 6.042,1.052 6.656,1.25 0.615,0.198 10 false CA4L 6.031,0.479 6.646,0.677 0.615,0.198 10 false CA4H 0.229,1.271 1.333,1.479 1.104,0.208 10 false A31*5, G64*6 1.813,2.271 2.427,2.469 0.615,0.198 10 false A51 4.99,2.938 5.604,3.135 0.615,0.198 10 false A42 5.219,1.146 5.833,1.344 0.615,0.198 10 false G72 5.875,4.688 6.49,4.885 0.615,0.198 10 false A24 2.896,6.427 3.51,6.625 0.615,0.198 10 false G103 0.25,1.458 2.76,1.844 2.51,0.385 10 false Hybrid Vehicle Control ECU Assembly 0.188,4.719 2.823,5.271 2.635,0.552 10 false Inverter with Converter Assembly 2.885,6.604 4.927,7.302 2.042,0.698 10 false No. 3 CAN Junction Connector 6.104,4.906 7.156,5.51 1.052,0.604 10 false ECM 4.979,3.125 7.146,3.646 2.167,0.521 10 false Brake Booster with Master Cylinder Assembly (Skid Control ECU) 5.219,1.313 7.156,1.729 1.938,0.417 10 false Central Gateway ECU (Network Gateway ECU) 1.396,0.458 2.01,0.656 0.615,0.198 10 false 21 1.406,0.844 2.021,1.042 0.615,0.198 10 false 8 1.823,2.073 2.438,2.271 0.615,0.198 10 false 1*3 1.844,2.479 2.458,2.677 0.615,0.198 10 false 7*3 4.104,3.875 4.719,4.073 0.615,0.198 10 false 3 4.083,4.26 4.698,4.458 0.615,0.198 10 false 13 3,4.26 3.615,4.458 0.615,0.198 10 false 12*2 4.115,2.167 4.729,2.365 0.615,0.198 10 false 7 4.094,0.854 4.708,1.052 0.615,0.198 10 false 11 4.104,0.448 4.719,0.646 0.615,0.198 10 false 1 3.198,0.458 3.406,0.667 0.208,0.208 10 false 5 3.135,0.854 3.75,1.052 0.615,0.198 10 false 15 3.188,2.156 3.417,2.354 0.229,0.198 10 false 4 3.125,2.552 3.74,2.75 0.615,0.198 10 false 14 5.76,3.875 6.375,4.073 0.615,0.198 10 false 8 5.698,4.281 6.313,4.479 0.615,0.198 10 false 18 5.708,2.573 6.323,2.771 0.615,0.198 10 false 34 5.708,2.177 6.323,2.375 0.615,0.198 10 false 35 5.719,0.833 6.333,1.031 0.615,0.198 10 false 17 5.708,0.458 6.323,0.656 0.615,0.198 10 false 18 5.188,6.354 5.802,6.552 0.615,0.198 10 false A45 5.958,5.698 6.573,5.896 0.615,0.198 10 false CANH 1.406,3.771 2.021,3.969 0.615,0.198 10 false 24*2 1.385,4.188 2,4.385 0.615,0.198 10 false 33*2 5.198,6.542 7.042,7.438 1.844,0.896 10 false Vehicle Approaching Speaker Controller*1 3.063,3.865 3.677,4.063 0.615,0.198 10 false 2*2 4.104,2.573 4.719,2.771 0.615,0.198 10 false 17 0.281,7.063 3.167,7.625 2.885,0.563 10 false *1: w/ Vehicle Proximity Notification System 0.302,7.458 2.51,7.854 2.208,0.396 10 false *2: for 4WD/AWD 3.354,7.073 5.563,7.469 2.208,0.396 10 false *3: for 2WD 5.958,6.083 6.573,6.281 0.615,0.198 10 false CANL 0.917,4.375 1.531,4.573 0.615,0.198 10 false CNL2 0.896,3.958 1.51,4.156 0.615,0.198 10 false CNH2 5.75,5.563 6.365,5.76 0.615,0.198 10 false 3 5.74,5.969 6.354,6.167 0.615,0.198 10 false 4 4.115,5.563 4.729,5.76 0.615,0.198 10 false 8 4.094,5.958 4.708,6.156 0.615,0.198 10 false 18 1.813,2.667 2.427,2.865 0.615,0.198 10 false A51 1.406,2.667 2.021,2.865 0.615,0.198 10 false A87 1.406,2.271 2.021,2.469 0.615,0.198 10 false A87 1.417,2.063 2.031,2.26 0.615,0.198 10 false 22*2 1.406,2.479 2.021,2.677 0.615,0.198 10 false 31*2 1.396,4.375 2.01,4.573 0.615,0.198 10 false A87 1.396,3.969 2.01,4.167 0.615,0.198 10 false A87 0.135,6.292 0.875,6.667 0.74,0.375 10 false z26 0.146,6.49 1.917,6.865 1.771,0.375 10 false Battery ECU Assembly*4 2.74,7.469 4.948,7.823 2.208,0.354 10 false *4: for LITHIUM-ION BATTERY 1.375,5.563 1.99,5.76 0.615,0.198 10 false 29 1.385,5.979 2,6.177 0.615,0.198 10 false 28 3.125,5.573 3.74,5.771 0.615,0.198 10 false 10 3.135,5.969 3.75,6.167 0.615,0.198 10 false 20 0.917,5.667 1.531,5.865 0.615,0.198 10 false CA2H 0.938,6.052 1.552,6.25 0.615,0.198 10 false CA2L 5.094,7.063 7.156,7.479 2.063,0.417 10 false *5: for LHD 5.115,7.479 7.156,7.854 2.042,0.375 10 false *6: for RHD

CAUTION / NOTICE / HINT

CAUTION:

When performing the confirmation driving pattern, obey all speed limits and traffic laws.


NOTICE:
·

Because the order of diagnosis is important to allow correct diagnosis, make sure to begin troubleshooting using How to Proceed with Troubleshooting when CAN communication system related DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING

·

Before measuring the resistance of the CAN bus, turn the power switch off and leave the vehicle for 1 minute or more without operating the key or any switches, or opening or closing the doors. After that, disconnect the cable from the negative (-) auxiliary battery terminal and leave the vehicle for 1 minute or more before measuring the resistance.

·

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

Some parts must be initialized and set when replacing or removing and installing parts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

·

After performing repairs, perform the DTC check procedure and confirm that the DTCs are not output again.

DTC check procedure: Turn the power switch on (IG) and wait for 1 minute or more. Then operate the suspected malfunctioning system and drive the vehicle at 60 km/h (37 mph) or more for 5 minutes or more.

·

After the repair, perform the CAN bus check and check that all the ECUs and sensors connected to the CAN communication system are displayed as normal.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>DIAGNOSIS SYSTEM



HINT:
·

Before disconnecting related connectors for inspection, push in on each connector body to check that the connector is not loose or disconnected.

·

When a connector is disconnected, check that the terminals and connector body are not cracked, deformed or corroded.



PROCEDURE

1.CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 3 CAN JUNCTION CONNECTOR)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the No. 3 CAN junction connector.

C409616C40
0.146,1.333 0.552,1.615 0.406,0.281 5.75,0.698 6.156,0.979 0.406,0.281 1.573,1.406 1.573,0.406 1.573,0.406 1.427,0.406 true 1.406,2.406 1.573,2.406 1.573,2.406 1.573,1.656 true 4.375,1.99 4.208,1.99 4.208,1.99 4.208,1.656 true 0.823,1.417 0.823,0.833 0.823,0.833 0.667,0.833 true 0.646,2.021 0.813,2.021 0.813,2.021 0.813,1.677 true 3.083,1.417 3.073,0.417 3.073,0.417 3.25,0.417 true 3.458,1.396 3.458,0.74 3.458,0.74 3.635,0.74 true 2.5,2.594 2.323,2.594 2.323,2.594 2.333,1.667 true 1.771,2.615 1.927,2.615 1.927,2.615 1.927,1.656 true 2.51,0.167 2.333,0.167 2.333,0.167 2.333,1.417 true 1.781,0.167 1.938,0.167 1.938,0.167 1.938,1.417 true 3.25,2.344 3.083,2.344 3.083,2.344 3.083,1.667 true 1.188,1.406 1.188,0.615 1.188,0.615 1.042,0.615 true 1.021,2.229 1.188,2.229 1.188,2.229 1.188,1.677 true 5.854,1.229 5.5,0.854 5.5,0.854 5.344,0.854 true 4.219,1.417 4.219,1.01 4.219,1.01 4.469,1.01 true 3.615,2.115 3.448,2.115 3.448,2.115 3.448,1.688 true 0.125,0.073 0.438,0.271 0.313,0.198 10 false *a 0.49,2.115 1.146,2.313 0.656,0.198 10 false CANL*c 0.51,0.552 1.167,0.75 0.656,0.198 10 false CANH*c 0.198,1.375 0.792,1.583 0.594,0.208 10 false G103 3.708,2.031 4.365,2.229 0.656,0.198 10 false CANL*h 0.094,0.76 0.75,0.958 0.656,0.198 10 false CANH*b 0.083,1.927 0.74,2.125 0.656,0.198 10 false CANL*b 1.229,0.094 1.885,0.292 0.656,0.198 10 false CANH*e 3.698,0.667 4.354,0.865 0.656,0.198 10 false CANH*h 2.563,2.521 3.219,2.719 0.656,0.198 10 false CANL*f 5.104,0.781 5.604,0.979 0.5,0.198 10 false CG 5.094,0.448 5.406,0.646 0.313,0.198 10 false *j 5.792,0.76 6.385,0.969 0.594,0.208 10 false G114 1.24,2.521 1.896,2.719 0.656,0.198 10 false CANL*e 3.313,2.271 3.969,2.469 0.656,0.198 10 false CANL*g 3.333,0.344 3.99,0.542 0.656,0.198 10 false CANH*g 2.563,0.094 3.219,0.292 0.656,0.198 10 false CANH*f 0.885,0.333 1.542,0.531 0.656,0.198 10 false CANH*d 0.865,2.323 1.521,2.521 0.656,0.198 10 false CANL*d 4.521,0.927 5.177,1.125 0.656,0.198 10 false CANH*i 4.458,1.917 5.115,2.115 0.656,0.198 10 false CANL*i
*a Front view of wire harness connector
(to No. 3 CAN Junction Connector)
*b to Central Gateway ECU (Network Gateway ECU)
*c to Inverter with Converter Assembly (for 4WD/AWD) *d to ECM
*e to Inverter with Converter Assembly *f to Hybrid Vehicle Control ECU Assembly
*g to Brake Booster with Master Cylinder Assembly (Skid Control ECU) *h to Vehicle Approaching Speaker Controller (w/ Vehicle Proximity Notification System)
*i to Battery ECU Assembly (for LITHIUM-ION BATTERY) *j Front view of DLC3



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition Connected to

*1: for 4WD/AWD

*2: w/ Vehicle Proximity Notification System

*3: for LITHIUM-ION BATTERY

G103-1 (CANH) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Central gateway ECU (network gateway ECU)
G103-11 (CANL) - G114-4 (CG)
G103-2 (CANH) - G114-4 (CG)*1 Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Inverter with converter assembly
G103-12 (CANL) - G114-4 (CG)*1
G103-3 (CANH) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher ECM
G103-13 (CANL) - G114-4 (CG)
G103-4 (CANH) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Inverter with converter assembly
G103-14 (CANL) - G114-4 (CG)
G103-5 (CANH) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Hybrid vehicle control ECU assembly
G103-15 (CANL) - G114-4 (CG)
G103-7 (CANH) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Brake booster with master cylinder assembly (skid control ECU)
G103-17 (CANL) - G114-4 (CG)
G103-8 (CANH) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Vehicle approaching speaker controller*2
G103-18 (CANL) - G114-4 (CG)
G103-10 (CANH) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher Battery ECU assembly*3
G103-20 (CANL) - G114-4 (CG)



Result:
Result Proceed to
OK A
NG (Central gateway ECU [network gateway ECU] CAN main wire) B
NG (Wire to ECU or sensor) C



A

REPLACE NO. 3 CAN JUNCTION CONNECTOR

B

2.CHECK FOR SHORT TO GND IN CAN BUS WIRE (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 3 CAN JUNCTION CONNECTOR)

C

3.CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECU OR SENSOR)
2.CHECK FOR SHORT TO GND IN CAN BUS WIRE (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 3 CAN JUNCTION CONNECTOR)
a.

Reconnect the G103 No. 3 CAN junction connector.


b.
C406353C56
1.479,0.26 1.917,0.469 0.438,0.208 1.438,2.542 1.875,2.75 0.438,0.208 2.24,2.104 2.042,2.104 2.042,2.104 1.823,1.521 true 1.646,1.5 1.365,2.083 1.365,2.083 1.198,2.083 true 1.625,3.146 1.188,2.75 1.188,2.75 1.021,2.75 true 1.563,0.292 2.177,0.49 0.615,0.198 10 false G72 1.5,2.573 2.115,2.771 0.615,0.198 10 false G114 0.094,0.073 0.708,0.271 0.615,0.198 10 false *a 0.823,2.01 1.313,2.198 0.49,0.188 10 false CA4L 0.104,2.563 0.719,2.76 0.615,0.198 10 false *b 2.302,2.031 2.75,2.24 0.448,0.208 10 false CA4H 0.729,2.667 1.344,2.865 0.615,0.198 10 false CG
*a Front view of wire harness connector
(to Central Gateway ECU [Network Gateway ECU])
*b Front view of DLC3


Disconnect the central gateway ECU (network gateway ECU) connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G72-18 (CA4H) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher
G72-17 (CA4L) - G114-4 (CG)



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 3 CAN JUNCTION CONNECTOR)

3.CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECU OR SENSOR)
a.

Reconnect all wire harness connectors.


b.
C406381C30
1.5,0.083 1.917,0.333 0.417,0.25 0.417,2.583 0.833,2.833 0.417,0.25 1.635,2.583 1.802,2.219 1.802,2.219 1.969,2.219 true 1.656,0.896 1.24,1.427 1.24,1.427 1.073,1.427 true 1.75,0.885 2.271,1.438 2.271,1.438 2.438,1.438 true 0.469,2.625 0.927,2.823 0.458,0.198 10 false G114 0.667,1.354 1.125,1.552 0.458,0.198 10 false CA4H 1.583,0.135 2.042,0.333 0.458,0.198 10 false G72 2.5,1.375 2.958,1.573 0.458,0.198 10 false CA4L 2.052,2.135 2.51,2.333 0.458,0.198 10 false CG 0.104,0.104 0.563,0.302 0.458,0.198 10 false *a 0.135,2.115 0.594,2.313 0.458,0.198 10 false *b
*a Component with harness connected
(Central Gateway ECU [Network Gateway ECU])
*b Front view of DLC3


Disconnect the connector that includes terminals CANH and CANL from the ECU or sensor to which the bus line shorted to GND is connected.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>TERMINALS OF ECU


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G72-18 (CA4H) - G114-4 (CG) Cable disconnected from negative (-) auxiliary battery terminal 200 Ω or higher
G72-17 (CA4L) - G114-4 (CG)


HINT:
·

If the resistance changes to 200 Ω or higher when the connector is disconnected from the ECU or sensor, there may be a short in the ECU or sensor.

·

If the resistance does not become normal when the connector is disconnected from the ECU or sensor, check for a short to GND in the wire harness and repair or replace the wire harness or connector if necessary.




Result:
Proceed to
OK
NG



OK

REPLACE ECU OR SENSOR

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR