53895B
1.REMOVE FRONT FENDER FRONT SPLASH SHIELD RH
53896B
2.REMOVE FRONT FENDER FRONT SPLASH SHIELD LH
51441
3.REMOVE NO. 1 ENGINE UNDER COVER
51420
4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY
5.DRAIN ENGINE COOLANT
52119A
6.REMOVE FRONT BUMPER COVER
16561C
7.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL (w/ No. 1 Radiator To Support Seal)
Remove the 3 clips.
Detach the 2 guides and remove the No. 1 radiator to support seal.
52614
8.REMOVE FRONT BUMPER NO. 2 ENERGY ABSORBER
52021
9.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
17750A
10.REMOVE INLET AIR CLEANER ASSEMBLY
16681A
11.REMOVE UPPER RADIATOR AIR GUIDE PLATE
Remove the 5 clips and radiator upper air guide plate.
88790B
12.REMOVE THERMISTOR ASSEMBLY
16595B
13.REMOVE NO. 1 RADIATOR AIR GUIDE LH
Remove the clip.
Detach the claw and guide and remove the No. 1 radiator air guide LH.
16593B
14.REMOVE NO. 1 RADIATOR AIR GUIDE RH
Remove the clip.
Detach the claw and guide and remove the No. 1 radiator air guide RH.
53510
15.REMOVE HOOD LOCK ASSEMBLY
86570
16.REMOVE VEHICLE APPROACHING SPEAKER ASSEMBLY
53205
17.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
Disconnect the 2 horn connectors.
| *1 | Hood Lock Control Cable Assembly |
| *2 | Wire Harness |
Detach the 2 clamps and disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.
Detach the 3 clamps and disconnect the wire harness from the upper radiator support sub-assembly.
Remove the 4 bolts and upper radiator support sub-assembly.
16282
18.DISCONNECT NO. 5 WATER BY-PASS HOSE
Slide the clip and disconnect the No. 5 water by-pass hose from the radiator assembly.
16283
19.DISCONNECT NO. 6 WATER BY-PASS HOSE
Disconnect the No. 6 water by-pass hose from the radiator assembly.
16571C
20.DISCONNECT NO. 1 RADIATOR HOSE
Detach the clamp and disconnect the No. 1 radiator hose from the fan with motor assembly.
Slide the clip and disconnect the No. 1 radiator hose from the radiator assembly.
16572D
21.DISCONNECT NO. 2 RADIATOR HOSE
Detach the clamp and disconnect the No. 2 radiator hose from the fan with motor assembly.
Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.
G9228A
22.DISCONNECT INVERTER COOLING HOSE
| *1 | No. 4 Inverter Cooling Hose |
| *2 | No. 5 Inverter Cooling Hose |
Detach the clamp and disconnect the No. 4 inverter cooling hose from the fan with motor assembly.
Detach the 3 clamps and disconnect the No. 5 inverter cooling hose from the fan with motor assembly.
16400
23.REMOVE RADIATOR ASSEMBLY
| *a | Lock Lever |
for Integration Type:
Detach the claw and raise the lock lever to disconnect the cooling fan motor connector as shown in the illustration.
After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.
Detach the 2 wire harness clamps.
for Non-integration Type:
Disconnect the cooling fan motor connector and detach the wire harness clamp.
Rotate the lever while pushing the lock, and disconnect the cooling fan motor connector.
After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.
Detach the 2 wire harness clamps.
Detach the 2 claws.
Detach the 2 guides and disconnect the cooler condenser assembly with the radiator assembly (for Inverter Coolant) from the radiator assembly.
Make sure not to damage the cooler condenser assembly with the radiator assembly (for Inverter Coolant) when disconnecting the cooler condenser assembly with the radiator assembly (for Inverter Coolant).
Remove the radiator assembly with the fan with motor assembly from the vehicle body.
Do not apply excessive force to the cooler condenser assembly with the radiator assembly (for Inverter Coolant) or pipe and hose when removing the radiator assembly with the fan with motor assembly.
Detach the 2 claws.
Detach the 2 guides and remove the fan with motor assembly from the radiator assembly.
Do not damage the radiator assembly when removing the fan with motor assembly.
16523A
24.REMOVE RADIATOR SUPPORT CUSHION
Remove the 2 radiator support cushions from the radiator assembly.
16535
25.REMOVE LOWER RADIATOR SUPPORT
Remove the 2 lower radiator supports from the radiator assembly.