Home › Suspension › ALIGNMENT / HANDLING DIAGNOSIS › REAR WHEEL ALIGNMENT › from 2020.08
RM3620E _53 Suspension _076599 ALIGNMENT / HANDLING DIAGNOSIS _0373032 REAR WHEEL ALIGNMENT N

ALIGNMENT / HANDLING DIAGNOSIS  REAR WHEEL ALIGNMENT  ADJUSTMENT  


CAUTION / NOTICE / HINT

Necessary Procedures After Adjustment
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Rear wheel alignment adjustment Electronically controlled brake system
·

Reset memory

·

Calibration


VSC malfunction w/ vacuum brake booster:(Click here)
w/o vacuum brake booster:(Click here)

Rear Wheel Alignment (Unladen)
Destination Korea, Saudi Arabia (4WD), Taiwan (Only Offroad Package) Other
Tire Size 225/65R17 225/60R18 235/55R19 225/65R17 225/60R18 225/55R19 235/55R19
Camber -1°00' (-1.00°) -1°00' (-1.00°) -1°00' (-1.00°) -1°05' (-1.08°) -1°05' (-1.08°) -1°05' (-1.08°) -1°05' (-1.08°)
Toe-in mm 0.3 mm (0.012 in.) 0.3 mm (0.012 in.) 0.3 mm (0.012 in.) 2.6 mm (0.102 in.) 2.6 mm (0.102 in.) 2.6 mm (0.102 in.) 2.7 mm (0.106 in.)
deg 0°02' (0.03°) 0°02' (0.03°) 0°02' (0.03°) 0°14' (0.23°) 0°13' (0.22° ) 0°13' (0.22° ) 0°14' (0.23°)

Tolerance
Camber +/- 45' (0.75°)
Toe-in mm +/- 2 mm (0.079 in.)
deg +/- 10' (0.17° )

Left-right Difference
Camber 45' (0.75°) or less

PROCEDURE

Hide 3.INSPECT CAMBER

NOTICE:

The rear camber is not adjustable.

If it is out of the standard, check the suspension parts for damage or wear, and replace them if necessary.


Hide 4.INSPECT TOE-IN

C317577C06
1.625,0.51 1.781,0.708 0.156,0.198 10 false A 1.667,1.365 1.823,1.563 0.156,0.198 10 false B 1.031,0.323 1.188,0.521 0.156,0.198 10 false C 2.208,0.344 2.365,0.542 0.156,0.198 10 false D
V100135

Front of the Vehicle


Check either B - A or C + D.

Hide 5.ADJUST TOE-IN

a.
C404822

Hold the bolt (rear suspension toe adjust cam) and loosen the nut.


b.

Turn the bolt to adjust the toe.


c.

Hold the bolt and tighten the nut.

Torque:
100 N*m (1020 kgf*cm, 74 ft.*lbf)