Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

DTC    58-40    GPS Antenna Error

DTC    58-41    GPS Antenna Power Source Error

DTC    80-40    GPS Antenna Error

DTC    80-41    GPS Antenna Power Source Error

for Preparation Click here


DESCRIPTION


DTC Code.
DTC Detection Condition
Trouble Area
58-40
Navigation antenna error
  1. Navigation antenna
  1. Navigation receiver assembly
58-41
Error of power source to navigation antenna
80-40
Navigation antenna error
80-41
Error of power source to navigation antenna

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK NAVIGATION ANTENNA CONNECTOR
  1. Check that the navigation antenna cord is securely connected to the navigation receiver assembly.

    OK:
    The cord is securely connected.

    HINT:
    Check the connector for damage. If damaged, the system may not function.



NG
CONNECT CONNECTOR
OK


2.REPLACE NAVIGATION ANTENNA
  1. Replace the navigation antenna with a normal one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Same problem does not occur.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END