Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT

BACK DOOR SUPPORT > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR STAY UPPER BRACKET


B192154
  1. Apply adhesive to the threads of the 2 bolts.

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent

  1. Install the back door stay upper bracket with the 2 bolts.

    Torque:
    20 N*m{ 199 kgf*cm , 14 ft.*lbf }



2. INSTALL BACK DOOR STAY LOWER BRACKET


B195040
  1. Apply adhesive to the threads of the 2 bolts.

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent

  1. Install the back door stay lower bracket with the 2 bolts.

    Torque:
    20 N*m{ 199 kgf*cm , 14 ft.*lbf }



3. INSTALL BACK DOOR STAY COVER


B195439
  1. Engage the clips and install the back door stay cover.



4. INSTALL BACK DOOR SIDE STOPPER


B195433
  1. Install the back door side stopper with the 2 bolts.

    Torque:
    7.8 N*m{ 80 kgf*cm , 69 in.*lbf }



5. INSTALL REAR COMBINATION LIGHT ASSEMBLY
  1. Install the rear combination light assembly (Click here).



6. INSTALL BACK DOOR DAMPER STAY SUB-ASSEMBLY


    B192151
  1. Install the back door damper stay sub-assembly with the lower side stop ring.



    B192153
  1. Install the upper side stop ring.

    NOTICE:
    Install the back door damper stay sub-assembly while supporting the back door by hand.