DTC P0657 Actuator Supply Voltage Circuit / Open |
| DTC No. | DTC Detection Condition | Trouble Area |
| P0657 | Throttle actuator power supply error | ECM |
| Related DTCs | None |
| Required sensors / components (main) | ECM |
| Required sensors / components (sub) | Throttle actuator |
| Frequency of operation | Once per driving cycle |
| Duration | Within 1 second |
| MIL operation | Immediate |
| Sequence of operation | None |
| Ignition switch | From ON to OFF |
| Throttle actuator power supply | 7 V or more |
| 1.CHECK DTC |
Clear DTC (Click here).
Turn the ignition switch off.
Disconnect the cable from the negative battery terminal and wait for 1 minute.
Connect the cable to the negative battery terminal.
Turn the ignition switch to ON for 10 seconds.
Turn the ignition switch off.
Turn the ignition switch to ON.
Check DTC.
|
| ||||
| OK | ||
| ||