LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Power Seat) > INSTALLATION |
| 1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Climate Control Seat System) |
![]() |
Engage the 3 claws to install the bush.
![]() |
Install the lumbar support adjuster assembly with the 2 screws.
Connect the connector.
![]() |
Engage the 4 hooks to install the seatback spring.
Install the 4 springs.
![]() |
Engage the 2 clamps and connect the connector.
| 2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/o Climate Control Seat System) |
![]() |
Attach the 3 claws to install the bush.
![]() |
Install the lumbar support adjuster with the 2 screws.
Connect the lumbar support adjuster connector.
![]() |
Engage the 6 hooks to install the seatback spring.
| 3. INSTALL SEATBACK COVER WITH PAD |
![]() |
Install the seatback cover with pad to the seatback frame.
Lift the seatback cover and, using hog ring pliers, install 4 new hog rings to the seat frame.
lift the seatback cover, connect the seatback cover bracket to the seat frame, and install the nut.
![]() |
Install the seatback cover wires.
Using hog ring pliers, install 2 new hog rings to the seat frame.
![]() |
Engage the hooks.
![]() |
Using hog ring pliers, install 3 new hog rings to the seat frame.
| 4. INSTALL FRONT SEAT HEADREST SUPPORT |
![]() |
Align the protruding portion of the front seat headrest supports with the installation grooves of the front seatback frame.
Engage the 4 claws to install the 2 headrest supports.
| 5. INSTALL FRONT SEAT CUSHION SHIELD INNER LH |
![]() |
Engage the 2 claws and clip to install the cushion shield.
Install the screw.
| 6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
![]() |
Install the front seat inner belt LH with the nut.
![]() |
Connect the connector and engage the 5 clamps.
| 7. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Connect the switch connectors.
Engage the 2 claws to install the cushion shield.
Install the 3 screws.
![]() |
Install the 2 screws.
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with 2 new hog rings.
| 8. INSTALL RECLINING POWER SEAT SWITCH KNOB |
![]() |
Engage the 2 claws to install the knob.
| 9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH |
![]() |
Engage the 2 claws to install the knob.
| 10. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat assembly (Click here).