OCCUPANT CLASSIFICATION ECU > INSTALLATION |
| 1. INSTALL OCCUPANT CLASSIFICATION ECU (for Manual Seat) |
![]() |
Check that the ignition switch is off.
Check that the negative battery (-) terminal is disconnected.
Engage the claw and occupant classification ECU.
Connect the connector to the occupant classification ECU.
| 2. INSTALL OCCUPANT CLASSIFICATION ECU (for Power Seat) |
![]() |
Check that the ignition switch is off.
Check that the negative battery (-) terminal is disconnected.
Engage the claw and occupant classification ECU.
Connect the 2 connectors to the occupant classification ECU.
| 3. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat) |
Install the front seat assembly RH (Click here).
| 4. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat) |
Install the front seat assembly RH (Click here).
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. INSPECT SRS WARNING LIGHT |