Home › Vehicle Interior › POWER OUTLETS (INT) › REAR POWER OUTLET SOCKET

REAR POWER OUTLET SOCKET > INSTALLATION

for Preparation Click here



1. INSTALL POWER OUTLET SOCKET COVER


    E162533
  1. Engage the 2 claws and install the power outlet socket cover.



2. INSTALL POWER OUTLET SOCKET ASSEMBLY


    E162532
  1. Engage the claw and install the power outlet socket assembly.



3. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)


  1. Connect the 3 connectors.


    B191799

  1. Engage the 12 clips to install the quarter trim panel.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clips.



    B190147
  1. Engage the 2 claws and install the cover.



    B190146
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190158
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190145
  1. Engage the 3 claws to install the outer lap belt anchor cover.



4. INSTALL QUARTER TRIM PANEL ASSEMBLY RH


  1. Connect the connector.


    B190143

  1. Engage the 12 clips and install the quarter trim panel assembly.

  1. Install the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }

  1. Engage the 2 clips.



    B190147
  1. Engage the 2 claws and install the cover.



    B190146
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190158
  1. Install the outer lap belt anchor with bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B190145
  1. Engage the 3 claws to install the outer lap belt anchor cover.



5. INSTALL REAR FLOOR MAT SUPPORT PLATE


    B190142
  1. Engage the 5 clips and the 4 claws, and install the rear floor mat support plate.



6. INSTALL ROPE HOOK ASSEMBLY


    B190141
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    B190139
  1. Engage the 2 claws and install the cover.



7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    B190154E01
  1. Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
    Paint Mark 
    Area
    Color
    RH side
    Pink
    LH side
    Purple



8. INSTALL REAR DOOR SCUFF PLATE RH


    B186666
  1. Engage the 2 claws and 5 clips to install the rear door scuff plate.

  1. Install the 2 bolts.



    B186665
  1. Engage the 6 claws and the 5 clips and the 2 guides, and install the rear door scuff plate.

  1. Install the screw.



9. INSTALL REAR FLOOR STEP NO. 1 COVER


    B191404
  1. Engage the 2 claws and install the rear floor step No. 1 cover.



10. INSTALL REAR FLOOR STEP NO. 2 COVER


    B193890
  1. Engage the 2 claws and the install the rear floor step No. 2 cover.



11. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH


    B191794
  1. Engage the 2 clips and the 5 claws, and install the rear cushion hinge lower cover RH.



12. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)
  1. Remove the rear No. 2 seat assembly RH (Click here).



13. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
  1. Remove the rear No. 2 seat assembly RH (Click here).



14. INSTALL DECK BOARD BRACKET


    B190119
  1. Install the deck board bracket with the 2 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



15. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY


    B190120
  1. Install the deck board reinforcement with the 4 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



16. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY


    B190117
  1. Engage the 5 clips and install the No. 1 deck board.



17. INSTALL ROPE HOOK ASSEMBLY


    B191405
  1. Install the rope hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    HINT:
    Use the same procedure for both sides.



18. INSTALL LUGGAGE COMPARTMENT TRIM BOX


    B190116
  1. Install the luggage compartment trim box with the 4 bolts.

    Torque:
    6.5 N*m{ 66 kgf*cm , 58 in.*lbf }



    B194633
  1. Install the 4 caps.



19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


    B194608
  1. Engage the 4 guides and install the No. 2 deck board.