REAR COIL SPRING > REMOVAL |
| 1. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH |
| 2. LOOSEN REAR UPPER CONTROL ARM ASSEMBLY LH |
![]() |
Loosen the 3 bolts and 3 nuts.
| 3. REMOVE REAR COIL SPRING LH |
![]() |
Insert a piece of wood between the jack and the No. 2 lower arm, and raise the No. 2 lower arm.
![]() |
Using SST, compress the coil spring.
Gently lower the jack and remove the coil spring and insulator.