Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for SD)

NAVIGATION SYSTEM (for SD) > Panel Switches do not Function

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK PANEL SWITCH
  1. Check for foreign matter around the switch that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2.CHECK PANEL SWITCH (DISPLAY CHECK MODE)


    E225786
  1. Enter the "Function Check/Setting I" and select "Panel&Steering Switch" (Click here).

  1. Operate the abnormal switch and check if the switch name and status are correctly displayed.

    OK:
    The number of switches pushed and the switch status are correctly displayed.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)