Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for SD)

NAVIGATION SYSTEM (for SD) > Display does not Dim when Light Control Switch is Turned ON

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK IMAGE QUALITY SETTING


    E226246E01
  1. Display the "Display" screen.

  1. Turn the light control switch to the tail or head position.

  1. Check if "Day Mode" setting on the display adjustment screen is on.

    OK:
    "Day Mode" setting is off.

    Text in Illustration 
    *a
    Example



NG
TURN "DAY MODE" SETTING OFF
OK


2.CHECK VEHICLE SIGNAL (DISPLAY VEHICLE SIGNAL)


    E235191E01
  1. Enter the "Function Check/Setting I" mode and select "Vehicle Signal" (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch Condition
    Display Condition
    TAIL or HEAD
    ON
    OFF
    OFF

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)