Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for SD)

NAVIGATION SYSTEM (for SD) > Voice is not Recognized

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK NAVIGATION SETTING


    E235196E01
  1. Display the "Voice Settings" screen.

  1. Check that "Voice Recognition Prompts" is not "Off".

    OK:
    "Voice Recognition Prompts" is not "Off".



NG
TURN "Voice Recognition Prompts" On
OK


2.CHECK SD CARD
  1. Check that the SD card is not deformed or cracked.

    OK:
    No deformations or cracks in the SD card.



NG
REPLACE SD CARD
OK


3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)


    E187218
  1. Enter the "Microphone&Voice Recognition Check" screen (Click here).

  1. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

  1. Push the recording switch and perform voice recording.

    HINT:
    1. Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
    2. Voice can be recorded up to 5 seconds.

  1. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

    OK:
    All check results are normal.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)