Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Vehicle Position Mark is not Updated

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK MAP DISC


    I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks in the map disc



NG
REPLACE MAP DISC
OK


2.CHECK NAVIGATION DISPLAY
  1. Check if touch scrolling can be performed on the map display.

    OK:
    Touch scroll can be performed.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK


3.CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)


    E176549
  1. Enter the "Navigation Check" mode and select "Vehicle Sensors" (Click here).

  1. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are equal or almost equal.

    OK:
    The readings are equal or almost equal.



NG
CHECK DTC OUTPUT (Click here)
OK

END