NAVIGATION SYSTEM (for SD) > Vehicle Position Mark is not Updated |
| 1.CHECK SD CARD |
Check that the SD card is not deformed or cracked.
|
| ||||
| OK | |
| 2.CHECK NAVIGATION DISPLAY |
Check if a touch scroll can be performed on the map display.
|
| ||||
| OK | |
| 3.CHECK VEHICLE SENSOR (OPERATION CHECK) |
![]() |
Enter the "Function Check/Setting I" and select "Vehicle Signal" (Click here).
While driving the vehicle, compare the "SPEED" indicator to the reading on the speedometer. Check if these readings are equal or almost equal.
|
| ||||
| OK | ||
| ||