Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Screen Flicker or Color Distortion

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISPLAY SETTING


    E176542
  1. Enter the display adjustment screen by pressing the "DISP" switch.

  1. Reset the display settings (contrast and brightness) and check that the screen appears normal.

    OK:
    The display returns to normal.



NG
Go to step 2
OK

END 

2.CHECK CABIN TEMPERATURE
  1. Check that the cabin temperature is higher than -20°C (-4.0°F).

    OK:
    The cabin temperature is higher than -20°C (-4.0°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3.CHECK COLOR BAR


    E176520
  1. Enter the "Display Check" mode and select "Color Bar Check" (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)