Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for SD)

NAVIGATION SYSTEM (for SD) > Screen Flicker or Color Distortion

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISPLAY SETTING


    E226245E01
  1. Display the "Display" button.

  1. Reset the display settings (contrast and brightness) and check that the screen appears normal.

    OK:
    The display returns to normal.

    Text in Illustration 
    *a
    Example



NG
Go to step 2
OK

END 

2.CHECK CABIN TEMPERATURE
  1. Check that the cabin temperature is higher than -20°C (-4°F).

    OK:
    The cabin temperature is higher than -20°C (-4°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3.CHECK COLOR BAR


    E226305
  1. Enter the "Color Bar Check Mode" screen (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)