QUARTER WINDOW GLASS > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE ROOF HEADLINING ASSEMBLY (w/o Rear Seat Entertainment System) |
Remove the roof headlining assembly .
| 4. REMOVE ROOF HEADLINING (w/ Rear Seat Entertainment System) |
Remove the roof headlining assembly .
| 5. REMOVE ROOF HEADLINING (w/ Sliding Roof) |
Remove the roof headlining assembly .
| 6. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY |
![]() |
Disengage the 4 clips and remove the roof side rail garnish.
| 7. REMOVE QUARTER WINDOW GLASS |
![]() |
Apply protective tape to the outer circumference of the quarter window, as shown in the illustration.
From the interior, insert piano wires between the vehicle body and quarter window, as shown in the illustration.
Tie objects that can serve as handles (for example, wooden blocks) to all wire ends.
Cut through the adhesive by pulling the piano wire around the quarter window.